Search found 474 matches

by TJS
Tue 27 Feb, 2024 11:29
Forum: Z1 roadster
Topic: Replacing the Fan Belt..
Replies: 9
Views: 796

Re: Replacing the Fan Belt..

Couple of things to consider when replacing a fan belt Make sure you have the correct belt. As pointed out there are two and one is slightly smaller and is not going to fit if you get them the wrong way round. You need the larger 9.5 x 965 belt not the smaller 9.5 x 900 power steering drive belt. Th...
by TJS
Thu 08 Feb, 2024 14:02
Forum: Z1 roadster
Topic: Seat panel lower tabs broken
Replies: 4
Views: 16947

Re: Seat panel lower tabs broken

The fixing tabs break very easily if the securing stud is over tightend. Finger tight with threadlock is fine. I am pretty sure one of the German specialists produce a small 3 d printed replacement repair section/ tab which can be bonded onto the seat shell. Michael ?? https://i.imgur.com/gyKE8zm.jp...
by TJS
Thu 08 Feb, 2024 13:39
Forum: Z1 roadster
Topic: need new body panels
Replies: 6
Views: 837

Re: need new body panels

BMW have commissioned replacement panels in the past as and when there is sufficient accrued demand. As suggested by Michael I would be inclined to contact BMW Classic direct to register your requirements rather than rely on your local BMW dealer. A batch of new front wings were produced in 2013, no...
by TJS
Thu 08 Feb, 2024 13:27
Forum: Z1 roadster
Topic: Z1 Art Graphics
Replies: 1
Views: 601

Re: Z1 Art Graphics

Hi Pat, trust you are well. I have three of the Black Art etchings and did ask them to produce a Z1 item as a private commission about 6 years ago. I provided them with the requisite details and various photographs but they never bounced the ball back. They can customise the base etching for those w...
by TJS
Thu 05 Oct, 2023 09:15
Forum: Z1 roadster
Topic: Blaupunkt Bremen SQR 46 DAB
Replies: 26
Views: 16643

Re: Blaupunkt Bremen SQR 46 DAB

Another retro option from Blaupunkt …

Frankfurt RCM82 DAB

https://blaupunkt.com/product/frankfurt-rcm-82-dab/
by TJS
Thu 05 Oct, 2023 09:06
Forum: Z1 roadster
Topic: BMW Z1 89 - Speedo/mileometer issues
Replies: 19
Views: 12504

Re: BMW Z1 89 - Speedo/mileometer issues

A useful resource. Glad to hear it has fixed, did they explain what the problem was ?
by TJS
Thu 05 Oct, 2023 09:02
Forum: Z1 roadster
Topic: Replacement tyres
Replies: 8
Views: 17605

Re: Replacement tyres

The Avon ZZS has a good reputation as a road / race tyre. It is compromised in terms of wet grip and wear, as with other very high performance tyres. A similar available tyre is the Nankang NS2 R but you may need to check if it is ok for European road use. Will the high performance road legal tyres,...
by TJS
Tue 19 Sep, 2023 12:07
Forum: Z1 roadster
Topic: Windshield wiper
Replies: 5
Views: 1387

Re: Windshield wiper

The easiest way to check if it is the wiper blades is to remove them from the spindles, turn on the wipers and hold the splined spindle. If it still judders try lubricating the mechanism, its a 10 minute job, I had to do this to silence an annoying squeak when the wipers were turned on. Mark the pos...
by TJS
Tue 22 Aug, 2023 09:43
Forum: Z1 roadster
Topic: May be of interest ….
Replies: 1
Views: 16301

May be of interest ….

https://www.petrolvibes.com/products/z1 ... l-wall-art



Also, Silverstone Festival on Saturday anyone ?
by TJS
Thu 30 Mar, 2023 11:01
Forum: Z1 roadster
Topic: Need help diagnosing passenger door latch fault
Replies: 14
Views: 19535

Re: Need help diagnosing passenger door latch fault

My doors could do with being serviced and overhauled which is currently beyond my post surgery DIY door belt replacement skills. Any recommendations ? Have the BMW updated the construction ? I bought a spare drive belt 3 years ago which had a 2010 date stamp on the box, fitting a 10 year plus rubber...
by TJS
Thu 30 Mar, 2023 10:50
Forum: Z1 roadster
Topic: Need some panels and sourcing advice
Replies: 12
Views: 17538

Re: Need some panels and sourcing advice

A local BMW dealer should have no problem obtaining available Z1 parts from BMW Germany. However, if my recent UK experience is anything to go by you will need to pay for the parts up front in full with the caveat that they are non returnable or refundable. Specialist European Z1 part suppliers may ...
by TJS
Thu 30 Mar, 2023 10:33
Forum: Z1 roadster
Topic: Replacement tyres
Replies: 8
Views: 17605

Re: Replacement tyres

The Yokohama tyres you mentioned are primarily track day focused, especially the A052 which replaced the A048 which were Lotus Exige S OEM fit. Whilst road legal the 052 (like the 048) has relatively poor grip in the rain and you may get 5k miles out of them, a lot less with spirited track use. The ...
by TJS
Sat 04 Mar, 2023 12:16
Forum: Z1 roadster
Topic: Replace mirror glass
Replies: 11
Views: 18178

Re: Replace mirror glass

I needed a replacement mirror glass in 2014. I think it was near side. Elms Bedford invoice shows part no B5.16.2.290.737. Description 145971/mirror glass Price an outrageous £52.96 plus vat £63.55. 9 years ago. This is glass only. As Fred mentioned it sticks to a central round plastic ring which is...
by TJS
Mon 28 Nov, 2022 21:46
Forum: Z1 roadster
Topic: Speedo gear wheels and handbrake light
Replies: 1
Views: 1170

Speedo gear wheels and handbrake light

It would appear the "hand brake on" warning light in the dash pod has gone missing. The digital workshop manual refers to a sensor under the handbrake lever but can't see it on RealOEM. The bulb may have blown which means the instrument pod is coming out which means I may as well check / r...
by TJS
Mon 28 Nov, 2022 21:34
Forum: Z1 roadster
Topic: map pockets
Replies: 6
Views: 1942

Re: map pockets

Not sure if the auco leather map pockets which fit either side of the transmission tunnel are still available .


Image


Image
by TJS
Mon 28 Nov, 2022 21:30
Forum: Z1 roadster
Topic: Red Z1 for sale
Replies: 78
Views: 49250

Re: Red Z1 for sale

Sexy prices ! As Felix points out, hopefully they can still be road registered euro 92k for the red car and euro 155k for the green.(plus fees ?) After spending 155k the buyer will need to budget for a new right lower side panel and a repaint. Unusual vertical split on the side panel, looks as if so...
by TJS
Sun 06 Nov, 2022 13:01
Forum: Z1 roadster
Topic: Red Z1 for sale
Replies: 78
Views: 49250

Re: Red Z1 for sale

by TJS
Wed 02 Nov, 2022 21:38
Forum: Z1 roadster
Topic: Blaupunkt Bremen SQR 46 DAB
Replies: 26
Views: 16643

Re: Blaupunkt Bremen SQR 46 DAB

Thanks for the information on the aerial location.

A further option is the recent relaunch of the Blaupunkt Frankfurt 82 DAB. Retro styling and similar features and spec to the Bremen SQR

https://blaupunkt.com/c_ee/produkt/fran ... cm-82-dab/
by TJS
Wed 26 Oct, 2022 10:22
Forum: Z1 roadster
Topic: Blaupunkt Bremen SQR 46 DAB
Replies: 26
Views: 16643

Re: Blaupunkt Bremen SQR 46 DAB

Suitable original Z1 compatible period Blaupunkt ICE units are available with upgrades for MP3 and Bluetooth connectivity. https://www.chromelondon.com/buy-electronic-radio-81-09-84-c.asp I didn’t realise until recently that the “new” SQR 46 is a generic Chinese unit made under licensed Blaupunkt br...
by TJS
Tue 30 Aug, 2022 10:42
Forum: Z1 roadster
Topic: "Covering column rear left"
Replies: 3
Views: 1814

Re: "Covering column rear left"

Thanks Keith

Went back to it yesterday and realised the factory glue holding the hinge in place along with the two metal slots had given up. Bonded back in place and problem solved.
by TJS
Sat 27 Aug, 2022 21:00
Forum: Z1 roadster
Topic: "Covering column rear left"
Replies: 3
Views: 1814

"Covering column rear left"

Put the hood down yesterday when leaving the GDSF and the nearside cover hinge snapped, which was rather annoying. Any repair suggestions as replacement parts are no longer available? Covering column rear left HELLGRAU 1 09/1990 51438134777 ENDED https://i.imgur.com/KNlOK3E.jpg https://i.imgur.com/n...
by TJS
Thu 04 Nov, 2021 09:28
Forum: Z1 roadster
Topic: It was only a question of time until ....
Replies: 4
Views: 3578

Re: It was only a question of time until ....

Hi Pat JB Weld tackles most Z1 related repairs, but unfortunately not the filler flap! There is insufficient space to reinforce the curved break on both sizes and refit into the holder which means the leverage force when opening overcomes the repair. Marco has kindly put me touch with Stephane Henni...
by TJS
Thu 28 Oct, 2021 14:50
Forum: Z1 roadster
Topic: Pirelli 225.45.16
Replies: 18
Views: 12200

Re: Pirelli 225.45.16

After a couple of emails and phone calls it would appear BMW are not minded to "approve" the Pirelli P700-Z in Z1 compatible 225/45/16. Additionally, it seems there is insufficient commercial demand given the alternative budget options currently available from Hankook, Nexen and Falken. As...
by TJS
Thu 28 Oct, 2021 14:01
Forum: Z1 roadster
Topic: It was only a question of time until ....
Replies: 4
Views: 3578

It was only a question of time until ....

Image



I am not optimistic about the longevity of a repair so need to look at replacement plus the inevitable repainting and matching of the metallic black.

Options ?
by TJS
Fri 15 Oct, 2021 15:11
Forum: Z1 roadster
Topic: Pirelli 225.45.16
Replies: 18
Views: 12200

Re: Pirelli 225.45.16

How are BMW getting on with approving the re-manufacture of the Z1 sized Pirelli P700-Z ??

The Yokohama 225/45/16 AD08R is no longer available having been replaced by an updated AD08RS (with go faster stripes) recommended for primarily trackday use.
by TJS
Fri 15 Oct, 2021 14:50
Forum: Z1 roadster
Topic: Red Z1 for sale
Replies: 78
Views: 49250

Re: Red Z1 for sale

‘New’ Z1 https://www.bonhams.com/auctions/26997/lot/8/ Hmm ... £90k for a "new" 1991 car with 20km on the clock, one of 8,000 produced. Alternatively, a "new" 1990 car with 18km on the clock, one of 3.8m produced, with a similar colour scheme for £100k. Decisions, decisions http...
by TJS
Wed 16 Sep, 2020 16:17
Forum: Z1 roadster
Topic: BMW Z1 @ Vintage Mecanic (TV series)
Replies: 8
Views: 7165

Re: BMW Z1 @ Vintage Mecanic (TV series)

Hi Fred, good to hear from you. With the car up in the air I got the chance to have a good look at the rubber U/J and it was in very good condition. So no need to replace, much to my wife's relief. https://i.imgur.com/JTYKj2C.jpg With BMW dealers now unwilling or unable to take on Z1 Inspection 2 se...
by TJS
Wed 16 Sep, 2020 14:48
Forum: Z1 roadster
Topic: Undertray fixings
Replies: 3
Views: 2816

Re: Undertray fixings

After 3 months of Z1 body fixing parts being on BMW Germany back order I have finally got around to putting the car back together. The Z1 workshop manual wants you to insert repair helicoils into the fibreglass before screwing in the brass threaded plugs. No need, BMW have increased the external dia...
by TJS
Wed 16 Sep, 2020 14:32
Forum: Z1 roadster
Topic: Rust on body above silencer.
Replies: 3
Views: 3001

Re: Rust on body above silencer.

JET ... so what were you doing ?.... looking for Z1's prostate gland ?
by TJS
Thu 18 Jun, 2020 11:09
Forum: Z1 roadster
Topic: Undertray fixings
Replies: 3
Views: 2816

Re: Undertray fixings

Many thanks Ivor,

A set of the correct sized "threaded plugs" have been ordered from BMW Germany @ £7.50. The respective Torx screws are no longer available from BMW but generic stainless studs and washers are widely available.

Cheers

TJS
by TJS
Wed 17 Jun, 2020 14:50
Forum: Z1 roadster
Topic: Undertray fixings
Replies: 3
Views: 2816

Undertray fixings

I can't track down a part number for the coarse threaded brass chassis inserts for the rear undertray torx fixings (item 12 in the link). The usual problem; the insets unscrew and wear rather than the torx stud. Do I need to track down similar size generic M6 rivnuts ? If so recommendations welcome ...
by TJS
Sun 24 May, 2020 10:22
Forum: Z1 roadster
Topic: BMW Z1 @ Vintage Mecanic (TV series)
Replies: 8
Views: 7165

Re: BMW Z1 @ Vintage Mecanic (TV series)

Thanks, interesting video. So ... I guess replacement of the original rubber driveshaft universal joint (26111225624) is now a preventive maintainence task. Doesn't look to be a solo DIY task. Asking my wife if she fancies rolling around on the garage floor for a couple of hours may have elicited a ...
by TJS
Sun 24 May, 2020 10:04
Forum: Z1 roadster
Topic: Blaupunkt Bremen SQR 46 DAB
Replies: 26
Views: 16643

Re: Blaupunkt Bremen SQR 46 DAB

The bluetooth interface kit looks like a good solution, however the problem with the Z1 is the severe lack of usable space to fit additional ICE. The CD43 will fit the Z1, just. When (if) it fails the Blaupunkt Bremen would be the replacement of choice. I still have the original 30 year old speakers...
by TJS
Sun 24 May, 2020 09:54
Forum: Z1 roadster
Topic: Z1 Gelb/yellow leather dye or reviver
Replies: 3
Views: 2134

Re: Z1 Gelb/yellow leather dye or reviver

I bought a BMW light grey recolour kit from Chrissy several years ago, as Pat said excellent service. The product is actually made by Colour Lock who sell kits in BMW specific colours. See attached charts and info. You will need to follow the preparation instructions in terms of sanding down the lea...
by TJS
Sat 09 May, 2020 10:12
Forum: Z1 roadster
Topic: Pink elastic band?
Replies: 3
Views: 2212

Re: Pink elastic band?

... it's for your top down post lock down pony tail
by TJS
Mon 30 Mar, 2020 10:13
Forum: Z1 roadster
Topic: What are your Covid 19 Z1 related isolation projects ?
Replies: 15
Views: 10486

Re: What are your Covid 19 Z1 related isolation projects ?

Hi Pat, hope you are well. The only slight difference with the offside liner is to make sure the fuel filler overflow pipe is threaded through the hole in the bottom rear adjacent to the spire nuts and fixings; tape a piece of string to it and pop through the centre hole while mounting the liner. Th...
by TJS
Thu 26 Mar, 2020 21:40
Forum: Z1 roadster
Topic: What are your Covid 19 Z1 related isolation projects ?
Replies: 15
Views: 10486

Re: What are your Covid 19 Z1 related isolation projects ?

So ... one down, one to go. You can install the new liner after taking off the damper without removing the wing. The best way is to insert the outer edge of the liner into the rim of the wing first to avoid putting pressure on the wing and its mountings. I cleaned and reused the fittings with thread...
by TJS
Wed 25 Mar, 2020 18:32
Forum: Z1 roadster
Topic: What are your Covid 19 Z1 related isolation projects ?
Replies: 15
Views: 10486

Re: What are your Covid 19 Z1 related isolation projects ?

Hi Keith Thanks for the heads up on the bump stops, I was also considering replacing the lower damper bushes, subject of course being able to get the parts within the next couple of weeks. Do you need to remove the rear wing to fit the replacement liners, hmm, very good question ! Hopefully not, how...
by TJS
Mon 23 Mar, 2020 10:45
Forum: Z1 roadster
Topic: True or false ?
Replies: 3
Views: 2968

True or false ?

The original scheduled production run for the Z1 was 4,000 cars, however, the final 8,000 was ultimately determined by the body moulds which were worn out ?

skip to 3.10.

https://www.youtube.com/watch?v=24nxV7cvMfw
by TJS
Mon 23 Mar, 2020 10:33
Forum: Z1 roadster
Topic: What are your Covid 19 Z1 related isolation projects ?
Replies: 15
Views: 10486

Re: What are your Covid 19 Z1 related isolation projects ?

Here’s a suggestion, get them copied in fibreglass :D Is fibreglass flexible enough when it comes to removing the rear wings for door maintenance? The road facing gel coat would need to be waterproof Another option may be to strengthen by sandwiching the original moulded thermoplastic items in two ...
by TJS
Fri 20 Mar, 2020 20:14
Forum: Z1 roadster
Topic: What are your Covid 19 Z1 related isolation projects ?
Replies: 15
Views: 10486

What are your Covid 19 Z1 related isolation projects ?

While checking the fuel hoses it was apparent the rear wheel arch liners have come to the end of their working life. They are now super brittle and the material around most of the fixing points has shattered. So .... having fitted new liners to the front arches 3 years ago my isolation project is to...
by TJS
Fri 20 Mar, 2020 19:42
Forum: Z1 roadster
Topic: LED Lights
Replies: 5
Views: 5089

Re: LED Lights

Rather than buy a complete light unit from BMW UK you can purchase a new front indicator / sidelight kit which include the plastic lens, rubber gasket and two new coloured plastic fixing screws from www.leebman24.de @ c.200 euros each plus delivery.
by TJS
Fri 20 Mar, 2020 19:34
Forum: Z1 roadster
Topic: Fuel Hoses
Replies: 8
Views: 8723

Re: Fuel Hoses

Having checked the hoses they seem to be in pretty good condition externally. I assume they are originals as the marked part number, 1717 029V, is no longer current. BMW cannot however confirm if new replacement parts are nitrile lined E10 compliant in which case is makes sense to order aftermarket ...
by TJS
Tue 10 Mar, 2020 22:44
Forum: Z1 roadster
Topic: Techno Classica, Essen
Replies: 8
Views: 7224

Re: Techno Classica, Essen

Nothing on the official website, however ... https://www.autotimesnews.com/techno-classica-in-essen-canceled-due-to-coronavirus/ Flying to / from Frankfurt with a meeting on Thursday pm, Essen on Friday. The meeting could be postponed, however, if flights and hotel cannot be refunded I may head to t...
by TJS
Wed 04 Mar, 2020 12:26
Forum: Z1 roadster
Topic: Techno Classica, Essen
Replies: 8
Views: 7224

Re: Techno Classica, Essen

Planning to return to Essen this year, the first of a summer of scheduled events .... unless of course ...

Image
by TJS
Wed 04 Mar, 2020 11:48
Forum: Z1 roadster
Topic: Fuel Hoses
Replies: 8
Views: 8723

Re: Fuel Hoses

Given the recent news regarding proposed enhanced ethanol E10 fuel in the UK ( I blame Brexit) I think the time has finally come to inspect and replace the rubber fuel lines with E10 compatible nitrile lined kit. https://www.bbc.co.uk/news/uk-51731757 As for those vehicles which could be affected se...
by TJS
Wed 04 Mar, 2020 11:34
Forum: Z1 roadster
Topic: cam belt change
Replies: 18
Views: 9574

Re: cam belt change

Time flies ... having checked the service book it is 7 years and 8k miles since the last cam belt and 2 years since the last BMW oil service. Time to get a quote. After going through the ritual BMW main dealer requirement of handing over the ignition key and watching the service receptionist try, an...
by TJS
Thu 06 Feb, 2020 18:27
Forum: Z1 roadster
Topic: Seats. Quick question
Replies: 7
Views: 5954

Re: Seats. Quick question

Seat bases are back from the trimmers and time to reassemble everything using silicone grease on the moving parts and new copper hog rings rather than the rusty steel originals.

Image

Image