zroadster.net

z3lowey

Just wondering what opinions might be re selling a few nice parts as a lot vs separate items? I have a (very)nearly new pair of chrome gills, clear 3rd brake light, windbreak and new steering wheel with mattchrom lower part. Lesser parts like Business cassette player, fog blanks too. Was thinking of...

z3lowey

Mine is up for sale - it's only a 1.9, but is mint.

Dealers are trying to shaft me so will be a bargain via Ebay...65k, FSH, no dings, rips, tears, rust etc. 2002.

I would prefer to see it go to a good home!!

z3lowey

One thing worth trying, try FABSIL. It's a water repellent treatment used on tents etc. This solved my water problem so worth a try: I found that by treating the strip approx 8" wide from window edge to first stitiched seam worked. This makes the water bead off, like wax on paintwork, versus so...

z3lowey

...Would somewhere around £3k be fair??

Any opinions/thoughts welcome

z3lowey

Just wondering what sort of value my 2002 1.9 may be worth??

64k, FSH, no rust, dings, rips, tears etc. Brushed alu console, clear 3rd brake light, chrome gills - Very very tidy. Silver/black leather

I'm looking at Dan's 3.0 so maybe mine could be a bargain for someone??

opinions sought...

z3lowey

They can be a bit of a sod!

Each kidney grille is best left complete i.e. chrome and black slats still as one unit, then I found the heal of my hand and generous "slaps" from behind will dislodge. Once you've done one side you'll get the knack for the other.

Good luck!

z3lowey

Anybody got any popcorn?

z3lowey

I'll be interested in any help/advice too, mine were an advisory last MOT

What would a garage charge for this?

z3lowey

Glad it's not just me then!

Gotta say it worked a treat.

z3lowey

Overhauled my washer system this weekend - removed old windscreen wipers, thoroughly cleaned screen, wiper arms and scuttle area. Added Rain-x to windscreen and fitted new BOSCH aero wipers. Removed and cleaned washer nodules on bonnet, in the kitchen sink, one was blocked. (My wife is used to me us...

z3lowey

Sorted - I had to tease it out with the help of a tiny flat head screw driver. Really tidied the back end up nicely!! I must get round to some piccies, I've fitted a brushed alu centre console, chrome gills, front fogs, and new steering wheel with matt chrome insert too. Car much improved now. Love ...

z3lowey

Thanks for reply - the only thing I can't loosen is the electrical connector - it's as tight as a nuns ****!!

I assume it's supposed to just push in/pull out, or is there a knack to it??

z3lowey

I have got hold of a 3rd brakelight complete with body colour cover - looks fairly straightforward to fit, just wondering whether it would be easier to fit entire unit including cover, or just remove light lens part and swap over?

Anybody got any hands on experience of this?

Thanks guys

z3lowey

Retro fitted front fogs over the weekend, nice easy job aprt from a duff fuse!! No bother though, soon sorted it. Wanted to say a big thanks to Andy, AKA Spurs fan in a coupe, who came to the rescue and supplied (MEGA-QUICK) a twin foglight switch. So fast, in fact, that he posted it before I had pa...

z3lowey

That'll do for me, PM me payment details please sir!

z3lowey

As per title, can't get on with my next project until somebody comes to the rescue...!

z3lowey

Thanks Julie, will get on to my local friendly BMW dealer tomorrow for these.

z3lowey

I ordered one from the dealer, using the part number from the write-up in the "how-to" database on here, turned up today and it's BLACK!! Hope it's right? Also, the part number quoted for the switch gives the SINGLE switch, not the double... :head: Never mind, should be fairly easy to sour...

z3lowey

As per title, mine are 13 years old and look like they are too!

Tried RealOEM but it's verryyy slow today. Anybody got a really nice pair for sale, or let me know part numbers and approx price from dealer etc??

Thanks all

z3lowey

The two nuts lock each other... ie. the larger inner nut is what holds the cable in tension, the smaller outer nut locks up against the large nut so that it can't loosen over time. You will obviously need two spanners of the respective sizes. Hold the large nut firmly, and undo the smaller nut. the...

z3lowey

Had a quick look under the handbrake gaiter, there is a pair of adjusters with a smaller nut and a larger nut together on each side. Do I need to just loosen the outer (smaller) nut? This is new territory for me, sorry if it's a numpty question! Remember, I just need to pull the handbrake up as far ...

z3lowey

Thanks for replies guys - much appreciated.

I guess once the console is out the heater panel/gearknob brushed alu thingy panels screw into the console, all will be easy to see.

z3lowey

I've disconnected every switch, removed every screw, console is loose but won't clear the handbrake! I can't seem to pull off gearknob, the garage replaced it before I bought the car, did they glue it? It won't budge. I thought I could ease console around gearknob, now I'm not so sure. Anybody got a...

z3lowey

Anybody got any tips on removing old and installing new radio/gear brushed alu parts?

Do I need to remove the whole centre console?

Any help/tips much appreciated.

Cheers

z3lowey

Thanks all for help, bought a set from Ken (Billibob) today, nice to meet a forum member for a quick chat before work.

Cheers!!

z3lowey

Quick question re round clock - is there a digital "clock only" version, or are they OBC units only?

Cheers guys

z3lowey

Yes, still looking, please upload me some photos - appreciate your reply!

z3lowey

I filled up with ESSO 97ron, their top of the range stuff for the first time - I have a 2002 1.9 with 62k on the clock. I can feel a difference - it's definitely much smoother. After a couple more tanks I'll report back, have been getting 36/37 MPG so far, with standard 95 ron, will be interesting t...

z3lowey

Thanks - as ever, first to respond: much appreciated!

z3lowey

As per title, looking for the brushed alu centre console - can't find it on RealOem, is it discontinued?

Anybody on here help with sourcing/got some for sale etc??

Are they an easy fit DIY?

z3lowey

I've changed my original business cassette head unit for a new Alpine unit and the sound quality is noticeably better.

Just wondering what others have done with their front speakers...?

What size are they, are they an easy DIY swap, what brand is recommended etc.?

z3lowey

Thanks - much appreciated.

z3lowey

YES!! That's it - it's the lower chrome part I am looking to swap out.

Cheers

z3lowey

I'll have a look around the site for a pic...

It's the 3-spoke type, the part below the centre/badge is black on mine, I've seen some in matt chrome and would like to change - providing it's fairly straightforward!

z3lowey

Evenin' guys,

Trying to remove the front, lower, part of my steering wheel so I can fit a "matt chrome" piece.

Can't see the type of screws at the back (if any!) my eyes are old (and tired) and I can't find the torch either

Anybody help me out while I start on the ale?

CHEERS

z3lowey

Forgot to mention, Yes, does have code and instruction booklets, also in mint condition.

z3lowey

I am just about to replace my original Business radio/cassette head unit - it is mint condition presently in a 61k car - let me know if you are interested in it.

z3lowey

I am very disappointed with the sound system in my 2002 Z3 - at only average volume all 4 speakers sound like they have blown! I have just bought a brand new (Alpine) head unit, my question is: will the existing speakers sound better with a decent head unit to drive them, or should I go the whole ho...

z3lowey

Thankyou!

z3lowey

Afternoon guys,

Brand new to the forum, have been busy looking over some old topics and came across the polished seatbelt guide in the shape of the 'Z' emblem.

Anyone know where I can buy one from?

Search found 40 matches