Search found 825 matches

by mrscalex
Mon 13 Apr, 2015 19:04
Forum: Stock exchange
Topic: Wanted: Worn/noisy but working DISA Valve
Replies: 12
Views: 1639

Re: Wanted: Worn/noisy but working DISA Valve

Is that for the same part number. There's no stock when I look it up?
by mrscalex
Sun 12 Apr, 2015 22:10
Forum: Stock exchange
Topic: Wanted: Worn/noisy but working DISA Valve
Replies: 12
Views: 1639

Re: Wanted: Worn/noisy but working DISA Valve

Alin S wrote:I'll be getting a new DISA tomorrow. So you can have my old one if you want. Judging by the price , it's for an M43/44?
Yes, it's for an M44. Please keep me in touch when the old one is available.

Are you getting your new one for a better price than £234?
by mrscalex
Sun 12 Apr, 2015 17:33
Forum: Stock exchange
Topic: Wanted: Worn/noisy but working DISA Valve
Replies: 12
Views: 1639

Re: Wanted: Worn/noisy but working DISA Valve

I don't get the noise on mine so I can't describe it first hand. But as I understand it you hear a distinct rattle at idle. I believe the DISA is commonly replaced because a) people don't like the noise b) they can disintegrate and enter the engine. I just want one to put on the car for 2 minutes to...
by mrscalex
Sun 12 Apr, 2015 14:49
Forum: Stock exchange
Topic: Wanted: Worn/noisy but working DISA Valve
Replies: 12
Views: 1639

Wanted: Worn/noisy but working DISA Valve

Part number 11611438404 I am getting a code 175 DISA Control Circuit Electrical. I suspect the electronics are gone in mine which is a shame as it is otherwise quiet. Before paying £234 for a new one I'd like to try and get hold of a discarded one and see if it gets rid of the error. Happy to pay a ...
by mrscalex
Sun 12 Apr, 2015 08:58
Forum: Z3 roadster
Topic: Engine oil capacity.
Replies: 15
Views: 1789

Re: Engine oil capacity.

Isn't there a mechanism on the filter housing that discharges the oil into the sump as the filter is moved around?

Or does this only work on the way out to clear the oil out of the filter for draining?
by mrscalex
Sat 11 Apr, 2015 01:17
Forum: Z3 roadster
Topic: 175 DISA error
Replies: 14
Views: 1774

Re: 175 DISA error

Del wrote:If it's the small vacuum pipe ringed in the photo
Yes, that's the one. Thanks.
by mrscalex
Fri 10 Apr, 2015 19:23
Forum: Z3 roadster
Topic: Recommissioning after 9 months garaged
Replies: 24
Views: 3266

Re: Recommissioning after 9 months garaged

ABS control module replaced today. 10 minute job and the 113 code cleared by itself along with the dash lights. There were a couple of wheel sensor codes came up but I'm guessing they were hangovers from when the control module was in the original car (second-hand unit off Ebay). They cleared down a...
by mrscalex
Fri 10 Apr, 2015 19:20
Forum: Z3 roadster
Topic: 175 DISA error
Replies: 14
Views: 1774

Re: 175 DISA error

Well I had what I consider to be a very luck break with the high idle problem. It took no time at all when I started looking to spot a small line that had perished right through. I'm surprised it was still in one piece, it pretty much fell off when I touched it. I'd love to tell you what hose it was...
by mrscalex
Thu 09 Apr, 2015 22:40
Forum: Z3 roadster
Topic: 175 DISA error
Replies: 14
Views: 1774

Re: 175 DISA error

That's very high, a smallish vacuum leak can push up the idle but nowhere near that. A large vacuum leak would cause non-start problems and lean error codes. I wonder if something is stuck e.g. the throttle cable or the butterfly valve in the throttle body? Yes, the throttle cable was stuck solid w...
by mrscalex
Wed 08 Apr, 2015 18:10
Forum: Z3 roadster
Topic: 175 DISA error
Replies: 14
Views: 1774

Re: 175 DISA error

I have INPA which is where I got the code from. But I'm new to it. Where do I look to activate the valve? And what am I looking for it to do? The actual description for code 175 is DISA Control Circuit Electrical. So that sounds like a failure in the electronics to me rather than a mechanical failur...
by mrscalex
Tue 07 Apr, 2015 20:35
Forum: Z3 roadster
Topic: 175 DISA error
Replies: 14
Views: 1774

175 DISA error

I'm getting a 175 DISA error on a 1998 1.9. I'm ready to put a new part on if needs be but as it's an expensive part (up to £250) I want to make sure I actually need to do it. There is no noise coming from the part and no loss of power. I'm looking at changing it a) in case the error is a warning th...
by mrscalex
Sun 05 Apr, 2015 21:08
Forum: Z3 roadster
Topic: Recommissioning after 9 months garaged
Replies: 24
Views: 3266

Re: Recommissioning after 9 months garaged

Noted the codes slightly wrong in the post. The 167 was the fuel pump relay caused by me pulling the relay. It cleared fine along with a battery code. The cam sensor was 112. Which also cleared with the first 2 codes in fairness. The 175 DISA did not clear. The ABS pump was 113 and seems to come fro...
by mrscalex
Sun 05 Apr, 2015 19:28
Forum: Z3 roadster
Topic: Recommissioning after 9 months garaged
Replies: 24
Views: 3266

Re: Recommissioning after 9 months garaged

I'm not finding a lot of time to get the car back on the road but I am a little further advanced. The Z3 (1998/M44) was successfully started. I removed fuel pump fuses 13 and 18 to turn the engine over to move the oil around. I have INPA now which confirmed an error 113/H71 with the ABS pump. I have...
by mrscalex
Thu 26 Mar, 2015 20:07
Forum: Stock exchange
Topic: WANTED: ABS Pump 34.51-1164896
Replies: 4
Views: 414

Re: WANTED: ABS Pump 34.51-1164896

I'm planning on removing my ABS pump at some point in the near future as I don't want it in for racing. Its from a 2.8ltr presume same component? There was at least one other part number fitted and possibly others. You would need to check what part number is on the unit. It's easier to see the part...
by mrscalex
Wed 25 Mar, 2015 22:48
Forum: Stock exchange
Topic: WANTED: ABS Pump 34.51-1164896
Replies: 4
Views: 414

Re: WANTED: ABS Pump 34.51-1164896

34.51-1164896 is the pump. 34.51-1164897 is the module. I think it was superceded with a different part number which is how it's shown on realoem. 34511165052 & 34516756289 respectively. As the most likely source is off a car being broken then I thought it was better to refer to it by original part ...
by mrscalex
Wed 25 Mar, 2015 22:11
Forum: Stock exchange
Topic: WANTED: ABS Pump 34.51-1164896
Replies: 4
Views: 414

WANTED: ABS Pump 34.51-1164896

For a 1999 1.9 M44.

I hopefully only need the module (mine has an error 71). So must be code free before removal from car.

Happy to take the pump too if cheap enough.

Thanks
by mrscalex
Tue 24 Mar, 2015 21:50
Forum: Z3 roadster
Topic: Knowing my car better
Replies: 25
Views: 1632

Re: Knowing my car better

What I am doing wrong then? When I put the last 7 digits of the VIN in BMW Archive I just get some very basic information. No detailed build data.
by mrscalex
Sun 15 Mar, 2015 22:47
Forum: Z3 roadster
Topic: Code readers not communicating.
Replies: 14
Views: 992

Re: Code readers not communicating.

Understood thanks Robert T. I've got code reading kit on the way.
by mrscalex
Sun 15 Mar, 2015 21:25
Forum: Z3 roadster
Topic: Code readers not communicating.
Replies: 14
Views: 992

Re: Code readers not communicating.

I think what I really meant to ask was are the error codes enough to tie down whether it's the wheel sensor, ABS pump or ABS control module. Or is some trial and error required.

Having read a few old posts now it looks like it's not an exact science.
by mrscalex
Sun 15 Mar, 2015 13:22
Forum: Z3 roadster
Topic: Code readers not communicating.
Replies: 14
Views: 992

Re: Code readers not communicating.

How did you did diagnose the ABS pump failure? I've just fostered my brother's Z3 and want to get it back on the road after a lay off. It had an intermittent ABS warning light before it came off the road. Our concern is if it's the pump rather than a faulty sensor it could be an expensive barrier.
by mrscalex
Sun 15 Mar, 2015 13:17
Forum: Z3 roadster
Topic: Recommissioning after 9 months garaged
Replies: 24
Views: 3266

Re: Recommissioning after 9 months garaged

Thanks for the support. Much appreciated.
by mrscalex
Sun 15 Mar, 2015 07:59
Forum: Z3 roadster
Topic: Recommissioning after 9 months garaged
Replies: 24
Views: 3266

Re: Recommissioning after 9 months garaged

Thanks Pingu. The Escorts were 25+ years ago and I couldn't go through all that again :lol: I used to spend the weekend fixing them just to make it through the next week. I see the value of the software. I'll certainly make that investment as and when required. Right now I just need to get it starte...
by mrscalex
Sat 14 Mar, 2015 14:07
Forum: Z3 roadster
Topic: Recommissioning after 9 months garaged
Replies: 24
Views: 3266

Re: Recommissioning after 9 months garaged

Grand thanks. The car isn't stored at my house so I just wanted to make sure I was equipped properly before travelling. I thought it might be more hidden than that and didn't know if the fuses were labelled.
by mrscalex
Sat 14 Mar, 2015 10:28
Forum: Z3 roadster
Topic: Recommissioning after 9 months garaged
Replies: 24
Views: 3266

Re: Recommissioning after 9 months garaged

Thanks for your replies. I'm in for rolling up my sleeves and getting stuck in at some point - I did all sorts of work on Mk I and 2 Escorts back in the day but for now I'd just like to get it fired up. It looks like I was a bit too cautious here. But I like the idea of removing the fuse to the fuel...
by mrscalex
Sat 14 Mar, 2015 01:02
Forum: Z3 roadster
Topic: Recommissioning after 9 months garaged
Replies: 24
Views: 3266

Recommissioning after 9 months garaged

Hi to all. I have 'adopted' my brother's 1999 Z3 1.9 which he has had from new but was taken off the road last summer when he replaced it as his daily driver with a 1 Series. It hasn't been started in 9 months and I want to try and get it fired up this weekend with a view to putting it back on the r...