zroadster.net

markrnorton

I had a spare exhaust system, so I thought I'd have a look inside. The first thing to note is that it's a double-skin exhaust. That's plagiarism! Your work is NOT original. Methinks you've been copying my postings on the Z3mcoupe website. :wink: Funny that I posted similar photos of "how to do...

markrnorton

I just sold one from my old 1.9 pre-facelift !

markrnorton

Good stuff

markrnorton

No problems , as long as it helps people out

Anybody want the last 2 panels before I throw them out !!

Just come and get them

markrnorton

^^^^^ agree

Knock sensors should stop this, even when i had the supercharger on mine at full chat there was no knocking

Car should also make fueling adjustments by itself when using diffrent grades.

markrnorton

They look like the're worth a punt. I'm going to order some for my Alfa !

markrnorton

Zedtree wrote:Thanks Mark.
Hopefully someone on here has one. Only discovered today that mine had beed sitting in a pool of water behind the trim. Explains my electricial gremlins!!!
Cheers anyway mate.

water in the boots' not good ! or is it due to condensation ?

markrnorton

Hi Mark, Can you please tell me if you have the module in the lhs of the boot / rear quater valence area . What serial numbers are on yours and would you have 6 inches of the wire going to it and the plug as mine is badly corroded. Please let me know all the numbers on your and an idea of the price...

markrnorton

I have also found passenger and central air vents and the cargo net for the passenger footwell if anybody wants them final bits need to go, I have no Z3 anymore so they are of no use to me. Come and collect, i still have a mint bootlid and driverside rear quarter, no dents, scratches or rust. Ideal ...

markrnorton

Z3cade wrote:Mark can you send me a pic of your floormats if there still forsale... thanks

Somebody else has first dibs on the mats, if it goes pearshaped I'll let you know

Mark

markrnorton

RemarkLima wrote:
markrnorton wrote:are the boot pieces in the boot lid ?
Yep, black trim peices on the inside opposite the boot lock if you see what I mean.

yes i have both of these and the central one as well

PM to sort out

Mark

markrnorton

i dont have the front side lights, they went ages ago

are the boot pieces in the boot lid ?

markrnorton

Floormats are black or dark greyish
Also have a pair of perfect rear lights

markrnorton

last few bits left now - all prefacelift from 1.9 16v just make me an offer, to clear now PREFACELIFT BOOTLID, mint condition with brake light PREFACELIFT REAR OFFSIDE QUARTER PANEL, mint condition Brake servo and M/C ABS PUMP ABS module ECU module Nearside and centre air vents, black, mint conditio...

markrnorton

People have been modding cars since cars first rolled of the production line of Henry Ford , This gives the average person a chance to stamp there own identity on a mass produced item. Its like moving into a new house and not painting the walls or changing the curtains , i like the house so i broug...

markrnorton

Well i dont know about the M, but when i had mine remapped with the supercharger on it (with the simota) the guys there were not that complimentary about simota's. they said more show than go. they recommended the more simple ITG megaflow filter. with this fitted instead of the simota, and a tweek w...

markrnorton

you can get the bits on ebay. i replaced both on mine 16" electric fan http://cgi.ebay.co.uk/Universal-Electric-Radiator-Cooling-Fan-16-Push-Pull-S-/400153772560?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5d2b060210 and a top hose mounted thermostat and housing, like this. cant remember ...

markrnorton

Wishbones and ARB etc now tentatively sold

Big discs left

oh and a brake servo/master cylinder if somebody want one

markrnorton

Jas
I don't want to split wishbones, needs to go as a package

markrnorton

V8 sold in 4 hours
Back to alfa's now

markrnorton

V8 Aborted, wanted a change. back to familiar terratory.

markrnorton

I won't leave as such, I'll be around !

markrnorton

Well most of the Z3 is broken now

and for those of you who haven't seen one bare....

easy car to strip, everything bolts on. really easy to swap stuff.

see here..

now onto the next project !!! not BMW though

markrnorton

Last cherries i guess Front wishbones, under 1000miles, new drop links and rear donut carrier with polybushes fitted, also front ARB with polybushes (1.9) Also big brake disks, as new , only fitted never used. 25mm wide by 325dia. same offset as standard Z3 disks so can be used with a caliper spacer...

markrnorton

Elite wheels and tyres on the old a13 rainham build custom exhausts

markrnorton

Fairly easy switch, all unbolt very quickly and easily.

2 rear wings, bumper and side sills and perhaps inner wing plastics

the only issue would be the wheels, you'd need wider rims or spacers to take them out flush with the arches or swap the radius arms etc (that is a pain)

markrnorton

I MIGHT HAVE SOME OF THESE. I'LL CHECK LATER

oops caps !

markrnorton

Still bits going ! Big brakes and calipers left, will separate if necessary (panels in Boston green) Rear offside wing Front offside wing Bootlit Windscreen Wiper motor ABS unit Brake master cylinder Dash plastics Clocks/speedo etc Steering stalk switches Various switches Small case diff 3.45 Front ...

markrnorton

Z3 panel replacement is dead easy, everything just unbolts.

markrnorton

Parts left (panels in Boston green) Rear offside wing Front offside wing Bootlit Windscreen Wiper motor ABS unit Brake master cylinder Nearside and offside doors Doorcards - black Dash plastics Clocks/speedo etc Steering stalk switches Various switches Steering rack Small case diff 3.45 Front hubs R...

markrnorton

please PM me for all parts, its going bonkers and its the only way to track

thanks

Mark

markrnorton

OXO wrote:I need a heater fan resistor. Is it the same on a 2.2i, and do you have it?

i am sure i have it, where is it located ?

markrnorton

VikingSven wrote:Do you have the centre console air vent available?
Part No.1 here: http://www.realoem.com/bmw/showparts.do ... g=64&fg=05

yes i have part no 1

)

markrnorton

Yep Boston green
Door panels black
No exhaust

markrnorton

no computer sorry

markrnorton

Bits going fast,

both doors left, door panels, interior panels.
offside front and rear wing panels
bootlid
steering rack
diff and shafts
etc etc

markrnorton

I've seen that before. I like it alot, great custom job.

markrnorton

I disagree, i think a centre exit exhaust would look great. i thought about that myself last year.

why follow the rest of the sheep ?

go for it

markrnorton

Mark

Is it worth investing in something like the Racelogic traction control system ?

Might help

Mark

markrnorton

Z3 prefacelift breaking now

Most parts available but going fast

I have unbolted a fair few panels and bits, not rust or dents, virtually perfect.

Front wings, side sills etc etc

PM me for details or requests

EVERYTHING MUST GO ! SALE NOW ON

)

markrnorton

with different inner and outer rim widths, hence 3 piece.

markrnorton

the whole point of a genuine 3 piece split rim is so you can vary the offset and rim width.

It can be measured to a degree with some metal rules, if he's local take a trip round

markrnorton

M3 slave is slightly bigger bore and gives more feel and control with standard master cylinder

markrnorton

No heated seat switches

markrnorton

took this off the car today. braided clutch line (with adaptor) c/w m3 clutch slave cylinder (less than 1000 miles')

if anybody want this combo for there car PM me.

you can collect or i can post

£30 for both

markrnorton

door cards yes, seats already gone

markrnorton

bang on yes style = replicas, but good ones

just deciding on the new project, got two options. what this space !

markrnorton

here you go

markrnorton

OK. Time for a clearout as I’m going to be doing something different, so the Z3 is breaking, all parts available plus these more ‘special’ parts below. I have pics of all of this, but most of it has been in my threads. If you need a pic PM me. Deals can be done ! Heavy stuff collection, will post th...

markrnorton

This is a common issue with coilovers Mark. I run a 3mm space up front and shorter springs

zroadster.net

Search found 841 matches

Re: Derestricted Exhaust

Re: re z3 is dead

Re: re ecu module

Need To Clear

F/S Z3 last few panels and twidley bits

v8 aborted

Z3 naked - dont look if you are squeamish

F/S Complete front wishbones, polybushed etc & big discs

Z3 prefacelift parts - breaking all parts and panels

F/s Braided S/s Clutch Line And M3 Clutch Slave Cylinder

Z3 clearout Big 6 pot brakes, 18" wheels, ap suspensio