Page 2 of 3

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sun 20 Apr, 2014 12:58
by spurs fan in a coupe
OXO driver's side is the same - sorry

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sun 20 Apr, 2014 13:00
by spurs fan in a coupe
Jarndyce wrote:Andy

I see the sills were provisionally sold, I take it they are both gone?

Peter
Hi Peter

Both sills are still available but are suffering from the usual rust at either end.

I can send you some pictures if you're after a project

Cheers

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sun 20 Apr, 2014 15:18
by Jarndyce
Thanks for the fast response. However I really don't need a "project" at the moment (decorating seems to be the major project on my good lady's itinerary)

I picked up a driver's side sill last week in fantastic condition and the right colour! The prospects of doing that with the passenger side sill are small.

Whilst looking for sills I saw a company called "Carbon Hood" who were offering fibreglass sills and a reasonable price per pair (£156) they were primed so there would still be the cost of painting. I wonder if any member has use them?

Once again thank you

Peter

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sat 26 Apr, 2014 07:03
by Johnc
Have you the middle rear brake light fittings (boot mounted) need the strip with bulbs on and possibly the plastic backplate it clips into. Please PM asap ta

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sat 26 Apr, 2014 18:15
by spurs fan in a coupe
Johnc wrote:Have you the middle rear brake light fittings (boot mounted) need the strip with bulbs on and possibly the plastic backplate it clips into. Please PM asap ta

Hi

I have this, a few bulbs, not all of them, I've not got the blanking cover that goes over the back of it.

Image

Image

Image

Image

Image

Image

Image

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sun 27 Apr, 2014 12:47
by Johnc
Thanks for a speedy response- it looks a bit worse for wear. Did it work when on the car and how many bulb holders do you have? I have a few badly corrided ones and would hope to make a full set from two iffy ones. What do you want for this item including p&p (including bilb holders), I am in south Wales.

thanks

john

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sun 27 Apr, 2014 13:26
by spurs fan in a coupe
Johnc wrote:Thanks for a speedy response- it looks a bit worse for wear. Did it work when on the car and how many bulb holders do you have? I have a few badly corrided ones and would hope to make a full set from two iffy ones. What do you want for this item including p&p (including bilb holders), I am in south Wales.

thanks

john

PM sent

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sun 27 Apr, 2014 13:27
by spurs fan in a coupe
Last few requests for parts from this car please, it will be going next weekend I hope, so that I can make a proper start on the 1.9 with the nice ///M front bumper! :wink:

Cheers

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sun 27 Apr, 2014 19:51
by BladeRunner919
Do either of the cars have an alarm with a sensor in the corners of the windscreen? I need one of the small plastic 'cups' that the sensors sit in.

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sun 27 Apr, 2014 20:22
by spurs fan in a coupe
BladeRunner919 wrote:Do either of the cars have an alarm with a sensor in the corners of the windscreen? I need one of the small plastic 'cups' that the sensors sit in.
Not that I've noticed, but I'll check tomorrow

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sun 27 Apr, 2014 23:01
by bertiejaffa
and the trim quarter turn screws :wink:

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Mon 28 Apr, 2014 20:55
by sirius-c
Do you have an outdoor temp sensor? Part number 65818350779

Sent from my Hudl HT7S3 using Tapatalk

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Fri 02 May, 2014 12:12
by henrycrun
and the headlight switch please ?

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sun 20 Jul, 2014 20:35
by spurs fan in a coupe
Car will be going soon, still got

Tatty rear wings - £20 each collected from Woking, Surrey

Nice rear bumper - £25 collected viewtopic.php?f=11&t=41076

Tatty bonnet - on eBay for £200 will take an offer http://www.ebay.co.uk/itm/161364151297? ... 1555.l2649

Various doors - silver and boston green - £30 collected

Nice black leather seats and door cards - £175 collected viewtopic.php?f=11&t=40477

Roll hoops £200 collected = viewtopic.php?f=11&t=41186

Various shark fin side grilles including black with carbon badges £35 delivered - viewtopic.php?f=11&t=38844
Fuel pump sender - £50 delivered

Pre and post Rear lights - £30 delivered viewtopic.php?f=11&t=41075 viewtopic.php?f=11&t=41075

///M front bumper - £250 cash on collection or sensible offer viewtopic.php?f=11&t=40922 http://www.ebay.co.uk/itm/161345044361? ... 1555.l2649

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Mon 21 Jul, 2014 09:40
by stupot50
Have you got an aerial booster from under the rear passenger side wing please?

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Mon 21 Jul, 2014 10:26
by spurs fan in a coupe
stupot50 wrote:Have you got an aerial booster from under the rear passenger side wing please?

Sorry aerial unit sold

Cheers

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Mon 21 Jul, 2014 10:29
by spurs fan in a coupe
As per PM, driver's side rear wing

Image

Image

Image

Image

As stated, not in good condition

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Wed 23 Jul, 2014 07:48
by Trevz3
Still got the drivers side sill ?

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Wed 23 Jul, 2014 10:34
by spurs fan in a coupe
Trevz3 wrote:Still got the drivers side sill ?

I'll check the condition when I get home

Cheers

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Wed 23 Jul, 2014 10:59
by Trevz3
spurs fan in a coupe wrote:
Trevz3 wrote:Still got the drivers side sill ?

I'll check the condition when I get home

Cheers
Thanks ,mines dented at the front

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Wed 23 Jul, 2014 18:07
by spurs fan in a coupe
Driver's side sill.

In Silver quite rusty at front, usual inner patches front and back.

Image

Image

Image

Blue - better condition, haven't taken front mud flaps off yet, but still tell-tale inner rust on rear, despite seeming to be perfect from outside.

Image

Image

Image

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Fri 25 Jul, 2014 07:46
by sebring
Hiya

Do you still have the storm gearknob?

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Fri 25 Jul, 2014 07:58
by spurs fan in a coupe
Sorry Storm knob was the first thing to go!

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Fri 25 Jul, 2014 08:57
by Luke2015
How much for the roof switch?

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Fri 25 Jul, 2014 16:43
by spurs fan in a coupe
Luke2015 wrote:How much for the roof switch?

I don't remember selling it, but when I dug out the ASC switch I couldn't find the roof one so maybe I did, I'll look again!

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Fri 25 Jul, 2014 16:55
by Trevz3
How much including postage for the silver sill ?

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Fri 25 Jul, 2014 16:59
by Luke2015
Ok mate no worries be great if you can find it!!

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Fri 25 Jul, 2014 18:20
by spurs fan in a coupe
Trevz3 wrote:How much including postage for the silver sill ?
Postage to where mate?

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Fri 25 Jul, 2014 18:37
by Trevz3
spurs fan in a coupe wrote:
Trevz3 wrote:How much including postage for the silver sill ?
Postage to where mate?
sorry leicester

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sat 26 Jul, 2014 06:05
by spurs fan in a coupe
Trevz3 wrote:
spurs fan in a coupe wrote:
Trevz3 wrote:How much including postage for the silver sill ?
Postage to where mate?
sorry leicester

Postage is expensive, I can do it all in for £35

Cheers

Andy

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sat 26 Jul, 2014 19:10
by pgunter66
Hello,

You would not have part 18 on the boot trim would you on this RealOEM link ?

http://www.realoem.com/bmw/showparts.do ... g=51&fg=65

I am missing one and it just makes the boot look untidy !!

Regards

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Fri 01 Aug, 2014 19:49
by spurs fan in a coupe
pgunter66 wrote:Hello,

You would not have part 18 on the boot trim would you on this RealOEM link ?

http://www.realoem.com/bmw/showparts.do ... g=51&fg=65

I am missing one and it just makes the boot look untidy !!

Regards

Sorry for delay, I've been away

I only have this style trim being broken at the moment, sorry!

Andy

Image

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sat 02 Aug, 2014 12:21
by zee3zee3
HI have you a left side screen pillar cover looking for one with no marks in the black grey color think its called Swartz ? cheers

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sat 02 Aug, 2014 19:06
by spurs fan in a coupe
zee3zee3 wrote:HI have you a left side screen pillar cover looking for one with no marks in the black grey color think its called Swartz ? cheers

Hi

I have this one.

Small mark at base as shown.

£13 delivered


Cheers

Image

Image

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sun 03 Aug, 2014 10:53
by Kondor
Hi. Do you by any chance have an aerial base unit? I know someone was asking a while back, but I'm hoping... :(

Regards

Graham

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Tue 05 Aug, 2014 19:25
by spurs fan in a coupe
Kondor wrote:Hi. Do you by any chance have an aerial base unit? I know someone was asking a while back, but I'm hoping... :(

Regards

Graham
PM sent

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sat 09 Aug, 2014 01:23
by JJG
On the the off chance I'm looking for the bolts at the bottom of the passenger and drivers side doors
They screw into a brace that keeps the window in the right position against the rubber seal.

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sat 09 Aug, 2014 16:45
by spurs fan in a coupe
JJG wrote:On the the off chance I'm looking for the bolts at the bottom of the passenger and drivers side doors
They screw into a brace that keeps the window in the right position against the rubber seal.

These mate?

Image

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sat 09 Aug, 2014 17:23
by Rig sparky
Hi any chance you still have windscreen to roof seal need a good one as my left hand side has started leaking ? if so how much posted to inverness
cheers

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sun 10 Aug, 2014 16:42
by spurs fan in a coupe
Rig sparky wrote:Hi any chance you still have windscreen to roof seal need a good one as my left hand side has started leaking ? if so how much posted to inverness
cheers

Is it this bit you're after?

The roof didn't leak and no signs of damage.

Image

Image

Image

Image

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Sun 10 Aug, 2014 18:45
by spurs fan in a coupe
This car has now been scrapped, I'll be starting a new thread for the next one!

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Mon 25 Aug, 2014 13:17
by GDZ3
Don't suppose you still have the roll hoops sitting in your shed do you ?.
Sorry for late enquiry, newbie to Z3 world.

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Mon 25 Aug, 2014 14:14
by spurs fan in a coupe
GDZ3 wrote:Don't suppose you still have the roll hoops sitting in your shed do you ?.
Sorry for late enquiry, newbie to Z3 world.
PM sent

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Mon 25 Aug, 2014 16:09
by woodsta888
Need a passenger window ASAP if you have one still or new one to break has turned up.

Cheers

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Mon 25 Aug, 2014 16:16
by spurs fan in a coupe
woodsta888 wrote:Need a passenger window ASAP if you have one still or new one to break has turned up.

Cheers

PM sent

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Mon 15 Sep, 2014 13:12
by g8jka
spurs fan in a coupe wrote: Sorry I don't have one with the part no.

the 1.9 I'm breaking is - 34511164047

the 2.0 I'm breaking is - 34511164896

Cheers
Do you still have the ASC unit from the 2.0 available?

Cheers

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Mon 15 Sep, 2014 13:23
by sirius-c
do you still have the windscreen to soft top rubber seal as photo'd above?

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Mon 15 Sep, 2014 18:03
by spurs fan in a coupe
sirius-c wrote:do you still have the windscreen to soft top rubber seal as photo'd above?
Yes

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Mon 15 Sep, 2014 18:04
by spurs fan in a coupe
g8jka wrote:
spurs fan in a coupe wrote: Sorry I don't have one with the part no.

the 1.9 I'm breaking is - 34511164047

the 2.0 I'm breaking is - 34511164896

Cheers
Do you still have the ASC unit from the 2.0 available?

Cheers

I'll check, I sold one, but cant remember if it was the 2.0 or the 1.9.

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Posted: Mon 15 Sep, 2014 18:54
by sirius-c
spurs fan in a coupe wrote:
sirius-c wrote:do you still have the windscreen to soft top rubber seal as photo'd above?
Yes

How much inc p&p?