Wanted please - Z3M outside temp sensor
The one that is located under the OSR wheel arch liner and connects with the dash vdo gauge
WANTED - Z3M outside temp sensor
- offyourmarks
- Joined: Sun 28 Oct, 2007 19:46
- Posts: 422
- Location: Cheshire
- Contact:
-
- Z Register member
- Joined: Sat 30 Jul, 2005 19:34
- Posts: 4054
- Location: Belfast
Re: WANTED - Z3M outside temp sensor
Dont think these are available any longer through the dealer network. In the UK at least....
BMW Z3, the only way to build a true roadster
- The most powerful letter in the world.
- The most powerful letter in the world.
Cloz wrote:There is something that will never change is my love for Z3
smartypants wrote:Conor?
With an M??
The World's gone mad
smartypants wrote:The Z3 rear is a great thing to behold
- BladeRunner919
- Joined: Fri 17 Feb, 2012 20:18
- Posts: 2225
Re: WANTED - Z3M outside temp sensor
They are only about £20 from www.bmminiparts.com/
-
- Joined: Tue 15 Oct, 2013 13:36
- Posts: 119
- Location: Kent
Re: WANTED - Z3M outside temp sensor
The M part is very different from the standard and fits in an entirely different place. Mine was playing up when I bought the car and I bought one from a dealer last year for about £100. No trouble to get just expensive. However once I had cleaned up all the connections (it is in a wheel arch) it worked fine again. I still have the brand new one...... But am hanging on to it atm. Try cleaning. The sender is very "solid state" there's really very little that can go wrong with a lump of brass with two spade terminals on it!!
- offyourmarks
- Joined: Sun 28 Oct, 2007 19:46
- Posts: 422
- Location: Cheshire
- Contact:
Re: WANTED - Z3M outside temp sensor
Thanks for the replies chaps.
It does makes sense to go down the cleaning route first - Ill give it a go
thanks
It does makes sense to go down the cleaning route first - Ill give it a go
thanks
Re: WANTED - Z3M outside temp sensor
Post some pictures of what you do for the knowledgebaseoffyourmarks wrote:Thanks for the replies chaps.
It does makes sense to go down the cleaning route first - Ill give it a go
thanks
Pingu
Re: WANTED - Z3M outside temp sensor
I cleaned up the contacts on mine, no problems sinceoffyourmarks wrote:Thanks for the replies chaps.
It does makes sense to go down the cleaning route first - Ill give it a go
thanks
Current...1998 ///M Coupe
Previously...1997 Z3 2.8
Previously...1997 Z3 2.8
Re: WANTED - Z3M outside temp sensor
I had a faulty sender on my first ///M.
Complete ball ache to get at and 5 times the price of a none ///M one to do the same job
mine would not clean up as the contacts had corroded so badly. The dealer supplied a new one FOC under warranty though.
I would not mind but when working they are not that great anyway
Complete ball ache to get at and 5 times the price of a none ///M one to do the same job
mine would not clean up as the contacts had corroded so badly. The dealer supplied a new one FOC under warranty though.
I would not mind but when working they are not that great anyway