Hi, My name is Juan, from La Coruna in the NorthWest of Spain. I have just purchased this Z3 2.8 and I am trying to bring it to a second live.
Till now I have done the following: New tires michelin pilot sport3 225/45/17 front and 245/40/17 after. BMW Inspecction II with new clutch and gear box repair, new belts, new brakes, all new fuids and filters, including gear box and diferential. You can see it in this video.
https://www.youtube.com/watch?v=KyXmNjIvFeM
Next to do: Shock absorbers for the M Sport suspension (any sugestions are wellcome), repair-renew the lether seats, mostly in the driver seat, and I woul like to swap the center console with an M one with the three gauges, just to complete the M looking of the car.
Best regards.
Juan.
1997 Z3 2.8 New to zroadster
Re: 1997 Z3 2.8 New to zroadster
Hi Juan, welcome to the forum.
1999 facelit Z3 Roadster 2.8 Auto in Cosmos Black aka 'Gloria'
Re: 1997 Z3 2.8 New to zroadster
Welcome, I am newcomer on here and have found the information invaluable and everybody whom I've spoken with very helpful, enjoy the car and the weather over there.
Re: 1997 Z3 2.8 New to zroadster
Welcome to the Forum.
Gazza
"Understeer is when you hit the wall with the front of the car, oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall and torque is how far you take the wall with you"
Z3 S54 M roadster , BMW Z1, BMW M3 CSL, Z4M Coupe
"Understeer is when you hit the wall with the front of the car, oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall and torque is how far you take the wall with you"
Z3 S54 M roadster , BMW Z1, BMW M3 CSL, Z4M Coupe
-
- Joined: Sun 11 Aug, 2013 06:08
- Posts: 2
Re: 1997 Z3 2.8 New to zroadster
Thanks to all of you for the wellcome.
I am enjoing all the good information that we can find in the posts.
Soon I will be requesting some help about swaping the console of my 2.8 with the one of the //M. I already have seen two or three posts on this topic and I am learning a lot.
Best regards from Spain.
Juan.
I am enjoing all the good information that we can find in the posts.
Soon I will be requesting some help about swaping the console of my 2.8 with the one of the //M. I already have seen two or three posts on this topic and I am learning a lot.
Best regards from Spain.
Juan.