Torque settings for M44 inlet manifold bolts

Del · Post by **Del** » Fri 30 Dec, 2011 19:23

Does any kind person out there happen to know the torque settings for the M44 inlet manifold bolts. I intend to wip off the upper manifold section for some possible vacuum hose maintenance/renewal.

Kornknarr · Post by **Kornknarr** » Sat 31 Dec, 2011 15:13

Lower manifold to cylinder head 15 nm 11 ft-lb
Lower manifold to upper manifold 15 nm 11 ft-lb
Manifold support to manifold 15 nm 11 ft-lb
According to the Bentley manual

Del · Post by **Del** » Sat 31 Dec, 2011 20:56

Many thanks KornKnarr