front splitter

UK forum for general and technical discussion about the Z3 roadster
Post Reply
tangomachine
Joined: Thu 11 Oct, 2012 22:05
Posts: 73

  blank

front splitter

Post by tangomachine »

Recently been looking for a front splitter for my zed. I quite like the Reiger one g8jka Has fitted to his car and just wondering what other types are available if any.

And are they all a universal fit across the zed range? Mines a pre face lift narrow body 1.9. Am I right in thinking they just changed the rear end on the later models and left the front the same?
deni2s
Joined: Mon 25 Mar, 2013 22:02
Posts: 761

  Z3 roadster 2.8

Re: front splitter

Post by deni2s »

2.8 has different bumper from 1.8 and 1.9. And z3m also has different.
User avatar
Southernboy
Joined: Thu 07 Oct, 2010 12:39
Posts: 6436

  Z3 roadster 3.0i
Location: Johannesburg

Re: front splitter

Post by Southernboy »

I've just yesterday received a set of these....they're very well made. They come unpainted, and you will need to specify the model of your car. You will find the seller on eBay under "racing_raven"
They were $120.00 excl shipping.
Image
They come with 8 nuts & bolts for fixing to the bumper. What I liked is that the join line between them and the OEM bumper is precise and obviously made to fit without any fiddling about. They also have a moulded in cutout for the drain holes which are under the OEM bumper, so a really well considered piece of equipment.
"Normal is overrated"
Image

Z3 Upgrades and Additions
Post Reply