New Project - 1998 M Roadster

UK forum for general and technical discussion about the Z3 roadster
Sailorbaz
Joined: Wed 26 Feb, 2014 10:07
Posts: 134

  M roadster S50

New Project - 1998 M Roadster

Post by Sailorbaz »

Some of you may have seen a number of my posts asking questions and looking for some parts. It's all for an M Roadster my family bought in 2001 from CoPart after the insurance had paid out due to a dashboard fire.

I have a few photos of when we got the car home back in 2001 but can't put my finger on them at the moment. Here are some photos of more recent times, now we've bitten the bullet and started working on it.

Image

Image

Image

Image

Image

Image

Image

Image

I got it home to Northern Ireland and started the task of pulling it apart. Needless to say, a hammer and some decent sized crowbars were needed.

Image

Image

Image

Image

Image

And this is how she sits now after cleaning and pulling out all damaged stuff other than the look

Image

Got all the parts I need gathered up now including blue/black dash, dials, centre consoles, carpets everything but forked out for a brand new look from BMW which come in on Monday.

Final photo for now...
Image
692DPG
Joined: Sun 09 Mar, 2014 19:30
Posts: 94

  Z3 roadster 2.8
Location: Lancashire

Re: New Project - 1998 M Roadster

Post by 692DPG »

Good luck with the project, it will be great to see you bring the car back to life. :thumb:
1997 (R) BMW Z3 2.8 Roadster - weekender
Hell Red/Imola Red/Black Z3M leather - 2 door, manual
2005 (55) Porsche 997 C4S 3.8 - man-o-porsche
Arctic Silver/Black leather - 2 door, manual
2017 (67) BMW M140i - daily
White/Black leather - 3 door, manual
User avatar
janijoeli
Joined: Wed 26 Jun, 2013 15:51
Posts: 265

  M roadster S50
Location: Isojoki, Finland
Contact:

Re: New Project - 1998 M Roadster

Post by janijoeli »

Oh man, I've been waiting for this... This is going to be an EPIC thread! :cheers Subscribed!
Image
pedro20001
Joined: Sat 29 Jan, 2011 20:34
Posts: 361

  Z3 roadster 2.2i
Location: tamworth

Re: New Project - 1998 M Roadster

Post by pedro20001 »

you are very brave......and i am very jealous !!!!!!!!!!
User avatar
Southernboy
Joined: Thu 07 Oct, 2010 12:39
Posts: 6436

  Z3 roadster 3.0i
Location: Johannesburg

Re: New Project - 1998 M Roadster

Post by Southernboy »

That's a "Captain Kirk" project.... bravely going where no man has gone before... + another watcher. :sunny
"Normal is overrated"
Image

Z3 Upgrades and Additions
User avatar
Mint
Joined: Tue 01 Nov, 2011 18:43
Posts: 475

  blank

Re: New Project - 1998 M Roadster

Post by Mint »

That's going to be a huge amount of work. I'm not sure I would attempt it. Best of luck and I'll be watching with interest.
User avatar
BonBon
Joined: Tue 08 Jan, 2008 21:10
Posts: 1227

  Z3 roadster 1.9

Re: New Project - 1998 M Roadster

Post by BonBon »

:cheers
I doubt Car SOS would have the balls to take on such a project!
Sailorbaz
Joined: Wed 26 Feb, 2014 10:07
Posts: 134

  M roadster S50

Re: New Project - 1998 M Roadster

Post by Sailorbaz »

Thing is with buying the new loom direct from BMW (1 of only 2 left in Germany) is it comes with all connectors, including the full Fusebox with all fuses. It should be straight forward enough feeding the cable through as I disconnect the old one. Once the Fusebox is bolted in, the engine bay connectors should be easy, the difficulty will be routing to all the correct places in the interior. Things like, rear speakers, gear knob lamp and all the wee bits like that. The bulk of the damage was around the heater box, which only has a few connections.

I'm excited about getting it back on the road and as we get close to the end will no doubt be online looking for photos and some of the smaller, nigly parts.

Cheers,
Barry
martyb
Joined: Thu 10 Jan, 2013 16:53
Posts: 308

  Z3 roadster 1.9

Re: New Project - 1998 M Roadster

Post by martyb »

Now this is a proper restoration!

Good luck

subscribed! :)
Image
spurs fan in a coupe
Joined: Fri 18 Apr, 2008 19:24
Posts: 1446

  Z3 coupe 2.8
Location: woking

Re: New Project - 1998 M Roadster

Post by spurs fan in a coupe »

Great project, good luck, there's always someone on here who can help when/if you get stuck.

Just out of interest, what mileage is on it!
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".
User avatar
Alfie
Z Register member
Joined: Thu 29 Apr, 2004 14:28
Posts: 3312

  M roadster S54
Location: Broadchurch....

Re: New Project - 1998 M Roadster

Post by Alfie »

Image

Might do the trick?

Good luck!

A.
Image
User avatar
Brian H
Joined: Tue 16 Dec, 2008 19:55
Posts: 2505

  Z3 roadster 3.0i

Re: New Project - 1998 M Roadster

Post by Brian H »

Good luck with this, Great project. I did not realise that you could buy a complete loom, every day is a learning day, Subscribed :)
Sailorbaz
Joined: Wed 26 Feb, 2014 10:07
Posts: 134

  M roadster S50

Re: New Project - 1998 M Roadster

Post by Sailorbaz »

spurs fan in a coupe wrote:Just out of interest, what mileage is on it!
4000 miles, apparently. Clocks melted in Fire, lol
freds dad
Joined: Thu 18 Mar, 2010 15:28
Posts: 532

  Z3 roadster 2.8
Location: Macclesfield

Re: New Project - 1998 M Roadster

Post by freds dad »

Following with interest.

Will you be adding the price of items to the post as you go along?
Bi11
Joined: Mon 05 Nov, 2012 21:26
Posts: 150

  M roadster S54
Location: Bedford

Re: New Project - 1998 M Roadster

Post by Bi11 »

Good luck, that's quite a project you have there!
Image
User avatar
Davejue1
Joined: Sun 22 Sep, 2013 07:25
Posts: 1249

  Z3 roadster 2.8
Location: Mansfield

Re: New Project - 1998 M Roadster

Post by Davejue1 »

Will be very interesting! Buy Southern boy a few pints and it'll be done in a jiffy!! :cheers
Image

"Growing old is mandatory, growing up is optional!"
User avatar
marcusplowman
Joined: Sat 22 May, 2010 20:34
Posts: 458

  Z3 roadster 2.8
Location: Belfast

Re: New Project - 1998 M Roadster

Post by marcusplowman »

Holy Moly...thats going to need some amount of work...and I thought getting the inlet manifold off mine was hard work :D
Sailorbaz
Joined: Wed 26 Feb, 2014 10:07
Posts: 134

  M roadster S50

Re: New Project - 1998 M Roadster

Post by Sailorbaz »

Dad was over last week with some more parts so we managed to get loads done, mostly successful.

Starting removing the old loom, trying to photograph as much as possible for correct tracing and routing.

Image

Image

Image

Image

Image

The new loom waiting to go in.

Image

Some more of the old loom waiting to come out.

Image

Image

Image

Crash bar removed.
Image

Boot wiring

Image

Image

Dad painting blasted and primed crash bar

Image

Painted crash bar fitted. Sound deadening material used from another car. New one cost £80 and would take 2 weeks to come from Germany.
Image

New roof fitted.
Image

Carpets starting to go in
Image

Image

Front half of carpet is in to, along with Heater box, window wiper motor just not taken any photos yet.

I've got all lights, indicators, heater motor, window wiper motor, washer pumps and clocks going. No ABS lights now that controller has been fitted, got Airbag lights though more than likely lack of seats.

Fuel pump not working though, after draining the tank and finding a very tacky substance at the bottom of the tank and in the fine mesh filter, so now on the hunt for a fuel pump. I can get to the pump once the carpets are in though, so I'm continuing to box everything up. Will get the dash and centre console in today hopefully, and clean up the seats for fitting the PAX seat once dry. Getting close.

It won't crank at all though, get dash lights but no cranking. On reading the codes we get error 66 which after some googling is suggesting 'Anti-theft system', immobilisor? I think the key I have has lost the code, so more computer wizardry is needed soonest. Waiting to get it mostly boxed up though before getting it connected.

Right better go, sun is out over here in NI, just wish the car was done now. :squeeze:
bertiejaffa
Joined: Fri 26 Jul, 2013 09:28
Posts: 1733

  M roadster S50
Location: Manchester

Re: New Project - 1998 M Roadster

Post by bertiejaffa »

This truly is a brilliant thread - well done
Here come the girls.....
Image
My //M Refurb
My First Zed Journal
User avatar
lightning
Joined: Tue 27 Nov, 2007 08:15
Posts: 818

  Z3 roadster 3.0i
Location: Stockport

Re: New Project - 1998 M Roadster

Post by lightning »

An amazing restoration job.
Looking at the burnt out interior, it seemed too far gone, but it is all coming together. You will have at the end of it a pretty much new Z3 M, almost certainly the lowest mileage one in existance.

It will be a great moment when the car runs once again under it's own power.
User avatar
nero
Joined: Wed 08 Oct, 2003 22:23
Posts: 669

  Z3 roadster 2.2i
Location: Edinburgh
Contact:

Re: New Project - 1998 M Roadster

Post by nero »

@Baz - when your Dad was at meets, we used to speak about this car ~ nice to see you've finally got around to sorting it :)
BMWCCScotland

Nothing is as frustrating as arguing with someone who knows what he's talking about.
User avatar
Gazza
Joined: Tue 04 Oct, 2005 20:58
Posts: 9521

  M roadster S54
Location: Romford Essex

Re: New Project - 1998 M Roadster

Post by Gazza »

Excellent thread :)

It's unusual to see such a thread on a modern classic, well done 8-)
Gazza

"Understeer is when you hit the wall with the front of the car, oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall and torque is how far you take the wall with you"

Z3 S54 M roadster Image, BMW Z1, BMW M3 CSL, Z4M Coupe
ImageImage
User avatar
Jonttt
Z Register member
Joined: Sun 28 Dec, 2008 16:32
Posts: 6554

  M roadster S54
Location: Liverpool

Re: New Project - 1998 M Roadster

Post by Jonttt »

Great thread, you can't fault a guy with a full set of trim tools :D
Happiness is not around the corner........happiness is the corner
Image Video or Journal Garage: 2015 FFRR Black Edition, Porsche Boxster GTS, 1997 Porsche Carrara C4S, Ex 2001 BMW S54 Z3m Roadster
Sailorbaz
Joined: Wed 26 Feb, 2014 10:07
Posts: 134

  M roadster S50

Re: New Project - 1998 M Roadster

Post by Sailorbaz »

Weathers been very good the last few days so I've got loads done.

Interior getting in
Image

Image

Image

Couple of photos of the underneath while I was changing the fuel filter. Couldn't believe how clean the underneath of the gearbox is.

Image

Image

Old centre console beside cleaned replacement

Image

Centre console getting there.

Image

Image

Quick question though. Switches on the centre console, can someone tell me the 5 switches that go under the dials?

Heated seats x 2, roof switch, AC/Recirc, what's the last one? Wee led?

Next step is new chassis number for dashboard and then window in, bonnet on ready for coding on Monday.

Cheers,
Barry
User avatar
Brian H
Joined: Tue 16 Dec, 2008 19:55
Posts: 2505

  Z3 roadster 3.0i

Re: New Project - 1998 M Roadster

Post by Brian H »

Last wee led will be the alarm led from the 3G EWS system.
Sailorbaz
Joined: Wed 26 Feb, 2014 10:07
Posts: 134

  M roadster S50

Re: New Project - 1998 M Roadster

Post by Sailorbaz »

My car doesn't have the BMW alarm system fitted but maybe the led is still in place for the OEM Immobiliser?
User avatar
Brian H
Joined: Tue 16 Dec, 2008 19:55
Posts: 2505

  Z3 roadster 3.0i

Re: New Project - 1998 M Roadster

Post by Brian H »

Aftermarket alarms were fitted at the dealers prior to delivery to the customer, the led was an indicator to let you know the status of the alarm.
bertiejaffa
Joined: Fri 26 Jul, 2013 09:28
Posts: 1733

  M roadster S50
Location: Manchester

Re: New Project - 1998 M Roadster

Post by bertiejaffa »

Brian H wrote:Last wee led will be the alarm led from the 3G EWS system.
Or hard top rear demist if you wanted to move the wiring around - ie, extend the alarm wiring to the back and put the HRW wiring at the front. I always find it odd that the HRW button is behind you and the alarm button in front. - Guess it depends if youre gonna have a hardtop for it though
Here come the girls.....
Image
My //M Refurb
My First Zed Journal
User avatar
Jonttt
Z Register member
Joined: Sun 28 Dec, 2008 16:32
Posts: 6554

  M roadster S54
Location: Liverpool

Re: New Project - 1998 M Roadster

Post by Jonttt »

///M's seem to have the roof switch randomly located either at the front or rear of the centre console, even the later S54's I've seen the button in both locations. Seems no real logic so I would just fit them where you like ;-)
Happiness is not around the corner........happiness is the corner
Image Video or Journal Garage: 2015 FFRR Black Edition, Porsche Boxster GTS, 1997 Porsche Carrara C4S, Ex 2001 BMW S54 Z3m Roadster
Sailorbaz
Joined: Wed 26 Feb, 2014 10:07
Posts: 134

  M roadster S50

Re: New Project - 1998 M Roadster

Post by Sailorbaz »

Over the last few days, received my new fuel pump so got that fitted.
Was going to go for an uprated one since a new one is over £300 but Dad sourced one from a breaker and sent it over for me, £40.
Image
Image

Changed the Oil filter since I'd heard that Oil Filters that have lay in cars for such long periods of time can break up once the car is running.
Old filter from 2000
Image

Thought it looked ok but for £8 you can't go wrong.
Image

Oil looks clean enough for now.. but once running, will be changed fairly soon afterwards.
Image
Image

New filter in
Image

Drying the wee carpet that goes behind the seats under the roof after a thorough washing.
Image
Image

Windscreen Fitted, thanks to Murray Motors of Magherafelt.
Image
Image
Image

All the jigsaw behind the seats built up after confirming the roof doesn't leak
Image
Image

Bonnet fitted once again, needs a clean. Pencilled in for today.
Image

Should get the interior finished off this afternoon, washed and ready to go to get the immobiliser and all lined up once again... I hope.
User avatar
Southernboy
Joined: Thu 07 Oct, 2010 12:39
Posts: 6436

  Z3 roadster 3.0i
Location: Johannesburg

Re: New Project - 1998 M Roadster

Post by Southernboy »

Can't help but admire your pace of work on this project. I might have thought an oil change before might provide the opportunity to get a fair sediment from the sump since the car has been standing so long.. ?
"Normal is overrated"
Image

Z3 Upgrades and Additions
Sailorbaz
Joined: Wed 26 Feb, 2014 10:07
Posts: 134

  M roadster S50

Re: New Project - 1998 M Roadster

Post by Sailorbaz »

Had thought about changing the oil before running it but would end up having to change again after a couple of hundred miles. After looking at the oil in the filter and on the dipstick, I decided against it.

Got the car all built up over the weekend and gave it it's first clean in 13 years and I'm pleased to say it come up very well after a quick wash.

Image

Image

Image

Image

Image

All finished

Image

Image

Image

Image

Image

Image

Now it's away to get the immobiliser sorted and hope to get a call later on today telling me it's running but I'm not holding my breath.

Image

Image

Image

Left off Sunday afternoon
Image
dw1985
Joined: Fri 30 Aug, 2013 07:28
Posts: 49

  Z3 roadster 1.9

Re: New Project - 1998 M Roadster

Post by dw1985 »

MAJOR respect for taking on this MASSIVE job.. and a job well done so far! looks mint, very jealous!

well done!
My Zeemer: 1998 BMW Z3 1.9 Atlanta Blue
Cooper01
Joined: Tue 29 Apr, 2014 08:06
Posts: 163

  Z3 roadster 3.0i

Re: New Project - 1998 M Roadster

Post by Cooper01 »

I wish I had a fraction of your awesome skills!
Can you give us an update on the cost so far?
This thread has gone to instant legendary status. :cheers
Cooper
User avatar
BonBon
Joined: Tue 08 Jan, 2008 21:10
Posts: 1227

  Z3 roadster 1.9

Re: New Project - 1998 M Roadster

Post by BonBon »

Amazing and impressive.
How do they imply on all the Discovery Channel Car Redos that these jobs are done in a week (including respray)
Do they have an army behind the scenes
Sailorbaz
Joined: Wed 26 Feb, 2014 10:07
Posts: 134

  M roadster S50

Re: New Project - 1998 M Roadster

Post by Sailorbaz »

Thanks everyone for your kind words.

Cost wise, at this moment no more than £2k. The biggest cost was the loom at £1280. Dash, centre console, hood, clocks and door cards were a song at £150!!! Carpets and some other bits of door trim etc £160 from a breaker here in NI. Getting it over to NI was £230 and then there's the cost for the immobiliser issue which is already at £120 for the EWS module thine coding. So yeah, around £2k as it stands. Some servicing items and filters but I can hardly include those are they're part and parcel if owning a car I suppose.
User avatar
Althulas
Joined: Fri 13 Feb, 2009 00:55
Posts: 818

  M roadster S50

Re: New Project - 1998 M Roadster

Post by Althulas »

That was a good read thanks for taking the time to share. Just the rest of summer for you to enjoy with it and well deserved.
If you like gaming with mature minded players visit our retirement home http://www.oap-clan.co.uk/
ImageImage
User avatar
Jonttt
Z Register member
Joined: Sun 28 Dec, 2008 16:32
Posts: 6554

  M roadster S54
Location: Liverpool

Re: New Project - 1998 M Roadster

Post by Jonttt »

Nice CSL as well :squeeze:
Happiness is not around the corner........happiness is the corner
Image Video or Journal Garage: 2015 FFRR Black Edition, Porsche Boxster GTS, 1997 Porsche Carrara C4S, Ex 2001 BMW S54 Z3m Roadster
User avatar
TaffZee
Joined: Thu 20 May, 2010 09:45
Posts: 1276

  blank
Location: ACREFAIR
Contact:

Re: New Project - 1998 M Roadster

Post by TaffZee »

A car to be proud of :thumb: from me...
Image1998 Atlanta Blue 2.8
Sailorbaz
Joined: Wed 26 Feb, 2014 10:07
Posts: 134

  M roadster S50

Re: New Project - 1998 M Roadster

Post by Sailorbaz »

Ok, latest is:-

The genius with the computer has the car cranking over but won't start. Throwing up a chassis number mismatch error code.

The only things that aren't original from the car are the 'Body control module' (behind glovebox) and the dials/clocks. His computer is saying the chassis number from the donor car we removed the clocks from, my question is, can these be recoded?
User avatar
Zed Free
Joined: Mon 12 Nov, 2012 20:23
Posts: 69

  Z3 roadster 2.2i

Re: New Project - 1998 M Roadster

Post by Zed Free »

This has been a really interesting thread, hope you get it started soon.
Looks really nice now.
Zed Free. - 2.2 Titanium Edition.
Image
Sailorbaz
Joined: Wed 26 Feb, 2014 10:07
Posts: 134

  M roadster S50

Re: New Project - 1998 M Roadster

Post by Sailorbaz »

Just remembered the wee EWS module with the blue connector behind the glovebox was changed also. Would this stop it from starting?
ajones13
Joined: Sat 16 Jun, 2007 11:43
Posts: 230

  Z3 roadster 2.0
Location: Belfast

Re: New Project - 1998 M Roadster

Post by ajones13 »

Hi,

I'm also from Northern Ireland.

EWS will stop it starting as this is generally coded to the cars transponder chip in the key. So if there is a mismatch it will stop it from starting and give the symptoms you've described.

Try this bypass as a test to see

https://www.youtube.com/watch?v=lGhaDwDddf4
User avatar
lightning
Joined: Tue 27 Nov, 2007 08:15
Posts: 818

  Z3 roadster 3.0i
Location: Stockport

Re: New Project - 1998 M Roadster

Post by lightning »

The car looks superb.

It's the electronics that are going to "kill" modern cars as they get older, l read on the Z4 forum a guy fitted a new steering rack/motor to his Z4 and the car's ECU would not talk to it.

Nobody could sort it and he ended up refitting the old one, which was notchy, and selling the car.
I can understand immobilisers and maybe the instrument cluster (to prevent people fitting one with lower recorded mileage?)

But why on earth does the steering motor have to be "coded" to a particular car? This is just not necessary. I can only imagine it is so nobody except the manufacturer can replace it.
ARoosterinaRoadster
Joined: Thu 29 May, 2014 08:49
Posts: 349

  Z3 roadster 2.0
Location: Lancashire

Re: New Project - 1998 M Roadster

Post by ARoosterinaRoadster »

lightning wrote:The car looks superb.

It's the electronics that are going to "kill" modern cars as they get older, l read on the Z4 forum a guy fitted a new steering rack/motor to his Z4 and the car's ECU would not talk to it.

Nobody could sort it and he ended up refitting the old one, which was notchy, and selling the car.
I can understand immobilisers and maybe the instrument cluster (to prevent people fitting one with lower recorded mileage?)

But why on earth does the steering motor have to be "coded" to a particular car? This is just not necessary. I can only imagine it is so nobody except the manufacturer can replace it.
Hi lightning. It is called 'Protecting The Product' BUT it is actually totally counter productive and is actually suppressing interest in earlier cars among those in the know. There is however a new sucker around every corner!!!!!!!!!! This has come about slowly but surely with all of the modern cars (and commercials) that have electrics at their very functioning.
As the various vehicles service data have been more accessible to ' Approved Workshops' and the technical info for service and repairs is slowly squeezes out of the manufacturers they are loosing money and not keeping their own dealerships busy because of the exorbitant rates that are charged. Certain otherwise long-life fail are then only available at 'Eye Watering' costs. The tip of the iceberg is the keys and transponder issue. My Volvo D5 SE Geartronic keys come at an horrendous cost and then the coding in to the ECU on-top and then of course the VAT at a further 20%. That will put a replacement key into the £180.00 bracket and there is no way around it as far as I know.
Happiness is a well kept Z3 and preferably running with the hood down - weather permitting.
User avatar
Deano1712
Z Register organiser
Joined: Sat 05 Aug, 2006 12:56
Posts: 1396

  M roadster S50
Location: Leeds

Re: New Project - 1998 M Roadster

Post by Deano1712 »

Nice job getting the car back to (nearly) running state. If the car was mine I would delete the Ews, and problem is sorted. Google search EWS 2 delete and you will see how to do it.

Sent from my C6603 using Tapatalk
Z3M with a few mods...and a little bit more power
bertiejaffa
Joined: Fri 26 Jul, 2013 09:28
Posts: 1733

  M roadster S50
Location: Manchester

Re: New Project - 1998 M Roadster

Post by bertiejaffa »

Deano1712 wrote:Nice job getting the car back to (nearly) running state. If the car was mine I would delete the Ews, and problem is sorted. Google search EWS 2 delete and you will see how to do it.
And put a rocket in it no doubt :lol:
Here come the girls.....
Image
My //M Refurb
My First Zed Journal
ARoosterinaRoadster
Joined: Thu 29 May, 2014 08:49
Posts: 349

  Z3 roadster 2.0
Location: Lancashire

Re: New Project - 1998 M Roadster

Post by ARoosterinaRoadster »

Hi Sailorbaz. This is truly a monumental achievement and it is this kind of dedication (or desperation) that could have saved many an all to easy insurance right-off - cop-out.
I am particularly interested in the 'All Over' soap-suds treatment and especially as like mine it has the Mohair Hood. I have just bought a Topaz Blue hardtop complete with fittings and trolley etc etc from a forum member - Kevin (kjayf) as a belt and braces job for winter protection of the Mohair Hood from algae and general winter muck and rubbish.
I assume that the soap does not affect the proofing on the hood!!! or is cleaning and renovating the Mohair Hood part of the master plan?
Happiness is a well kept Z3 and preferably running with the hood down - weather permitting.
Sailorbaz
Joined: Wed 26 Feb, 2014 10:07
Posts: 134

  M roadster S50

Re: New Project - 1998 M Roadster

Post by Sailorbaz »

Sorry I'm only posting again now, coming offshore has been a bit busy the last week and of course I've had nothing to really write about since leaving the car off.

I called today and it appears since I've come offshore he's put his attention to other car, which to be honest I don't mind so much since I'm away for 5 weeks. I would like him to have it running for me coming home, don't want to land home and still be waiting for parts. He's going to start at it again tomorrow.

I have a module under the steering column and one marked EWS behind the glovebox, does this sound correct?

The white one under the steering column was replaced with a new one that got us to the cranking over stage but still not starting. The one behind the glovebox (blue connector) was replaced with a salvaged unit but hasn't been recoded.

Am I going to have to buy a new module from BMW and have my man code it to the car?

Regarding the washing/foaming:-
The roof was a replacement and had sat in the bottom of a box van for 12 years so wasn't bothered about the protective coating etc, it was filthy and just wanted it cleaned. It come up beautifully and still has it's waxy appearance when wet or showered down with the hose. The whole car actually come up very well, well chuffed.
ARoosterinaRoadster
Joined: Thu 29 May, 2014 08:49
Posts: 349

  Z3 roadster 2.0
Location: Lancashire

Re: New Project - 1998 M Roadster

Post by ARoosterinaRoadster »

Hi Sailorbaz. I decided to bite the bullet and went down to a local'ish BP Petrol Station where they have several drive-in bay options with overhead pipework and a pay machine for DIY cleaning.
I actually used the soapy brush option over the whole car followed by a rinse off and it appears that there are no ills with the Mohair Hood.
Happiness is a well kept Z3 and preferably running with the hood down - weather permitting.
Post Reply