Angel Eyes

[Antm72]

Hi Guys can anyone tell me what diameter the z'ds lights are for ccfl rings ? Last time i completed this mod kits where a plenty but now they seem not, have tracked someone down but they are asking what size i require can anyone advise ? Thanks in advance

[Southernboy]

http://www.ebay.co.uk/itm/BMW-Z3-1-9-2- ... 27c7280f61

[g8jka]

Couple of measurements here

Ones that fit infront of lenses



Larger Ring (Left)

Outer diameter, left to right - 122 mm

Inner diameter, left to right - 107 mm

Outer diameter, top to bottom - 107 mm

Inner diameter, top to bottom - 95 mm

Smaller Ring (Right)

Outer diameter, left to right - 133 mm

Inner diameter, left to right - 118 mm

Outer diameter, top to bottom - 101 mm

Inner diameter, top to bottom - 92 mm

Ones that fit behind the lenses



Larger Ring (Left)

Outer diameter, left to right - 131 mm

Inner diameter, left to right - 115 mm

Outer diameter, top to bottom - 115 mm

Inner diameter, top to bottom - 110 mm

Smaller Ring (Right)

Outer diameter, left to right - 133 mm

Inner diameter, left to right - 118 mm

Outer diameter, top to bottom - 101 mm

Inner diameter, top to bottom - 92 mm

The half circle ones seem to be the same size with both types yet the fuller circle ones are bigger for the ones that sit behind the lenses hence why they won't fit infront and some of the bottom of the headlight needs to be trimmed away with a dremmel.

Hope this helps some people

[Not ready yet]

I've got these for sale, £20 + postage if you want them. CBA to fit them now


http://www.ebay.co.uk/itm/191571487272? ... 1555.l2649

[Zola3]

Hi Guys can anyone tell me what diameter the z'ds lights are for ccfl rings ? Last time i completed this mod kits where a plenty but now they seem not, have tracked someone down but they are asking what size i require can anyone advise ? Thanks in advance

Something seems to have gone awry with recent incarnations of these units (including those sold via the link quoted by Southernboy). Although the profile/shape is definitely Z3, they're too large to fit inside or outside the lens without undermining (IMO) the headlamp structure. I think it might be better to source some generic types of CCFL and be creative with some clear silicone etc. to attach them to the inside of the headlamp unit.

[Althulas]

The led ones I and several other people on here and .org have used with either a bit of trimming for outside the lens but mine fitted ok inside the lens ok

[Southernboy]

Given the measurement list provided by g8jka, it will make sense to de-tango the headlight, measure the diameter you need, and order parts accordingly. The OP suggested the seller wanted to know "what diameter" he wanted to buy, so it would seem the option to get the correct size is available....

[Althulas]

The item used were 131mm in diameter, fitting in front of the glass required some trimming of about 3 LEDs but I installed mine behind the glass no trimming required, just some positioning a little trim of some plastic in the headlight and hot glued in place.

[Antm72]

Thanks for all the replys here i managed to get a z3 kit so will have a play in a few days and see what fits where thanks

[Joycey]

I bought a set of 131mm rings from ebay they did look really cool.