Side Panel Stone Chip Guard Template

UK forum for general and technical discussion about the Z3 roadster
Post Reply
User avatar
waynerp
Joined: Sat 21 Jun, 2014 19:37
Posts: 74

  Z3 roadster 2.8
Location: Kent
Contact:

Side Panel Stone Chip Guard Template

Post by waynerp »

Hi All
I have recently purchased a vinyl plotter and was thinking it would be nice if i could cut out some of stone guards that go on the side panels.
Does anyone know where i could get a template with dimensions / shape etc ?

Thanks All
waynerp
Web Design & Optimisation http://www.neden.uk



Image
Z3 2.8
User avatar
Southernboy
Joined: Thu 07 Oct, 2010 12:39
Posts: 6436

  Z3 roadster 3.0i
Location: Johannesburg

Re: Side Panel Stone Chip Guard Template

Post by Southernboy »

Why not get some cheap vinyl, stick it on and use a free hand sketch - you can pull it off, stick it to som board and then cut and clean up until you're happy with the shape. You only need do one side, and then flip it to cut for the opposite side.
"Normal is overrated"
Image

Z3 Upgrades and Additions
User avatar
waynerp
Joined: Sat 21 Jun, 2014 19:37
Posts: 74

  Z3 roadster 2.8
Location: Kent
Contact:

Re: Side Panel Stone Chip Guard Template

Post by waynerp »

That.........
is a good idea.
Thanking you, will give that a go
waynerp
Web Design & Optimisation http://www.neden.uk



Image
Z3 2.8
User avatar
Althulas
Joined: Fri 13 Feb, 2009 00:55
Posts: 818

  M roadster S50

Re: Side Panel Stone Chip Guard Template

Post by Althulas »

If you pm me your address I can trace one of mine on some thin card or paper for you stick onto something more suitable as template and at least you will have the dimensions.
If you like gaming with mature minded players visit our retirement home http://www.oap-clan.co.uk/
ImageImage
User avatar
waynerp
Joined: Sat 21 Jun, 2014 19:37
Posts: 74

  Z3 roadster 2.8
Location: Kent
Contact:

Re: Side Panel Stone Chip Guard Template

Post by waynerp »

Althulas wrote:If you pm me your address I can trace one of mine on some thin card or paper for you stick onto something more suitable as template and at least you will have the dimensions.
Many thanks to Mark aka Althulas for kindly sending me a template of the stone chip guard.
Had my first crack at making one today.
Made a bit of a hash of it, but will leave it on until i get time to do a better one.
Image
waynerp
Web Design & Optimisation http://www.neden.uk



Image
Z3 2.8
deni2s
Joined: Mon 25 Mar, 2013 22:02
Posts: 761

  Z3 roadster 2.8

Re: Side Panel Stone Chip Guard Template

Post by deni2s »

Can you post template here on forum? I know some people were asking me about it too.
User avatar
waynerp
Joined: Sat 21 Jun, 2014 19:37
Posts: 74

  Z3 roadster 2.8
Location: Kent
Contact:

Re: Side Panel Stone Chip Guard Template

Post by waynerp »

Will Do
Once i have it perfect, i will upload it
waynerp
Web Design & Optimisation http://www.neden.uk



Image
Z3 2.8
Post Reply