Hi all I'm finally getting round to fitting the eibach lowering springs to the front of my Z is it worth renewing the top mounts whilst I'm at it,they don't look to be in too bad a condition is there a way to tell if they need to be replaced.
Also if I do replace is there a good worthwhile upgrade or shall I just stick with oe ?
Z3 front top mounts advice please
Re: Z3 front top mounts advice please
Simple answer yes - the bearings will be worn.
OEM fine for the front. The rears need to be upgraded to Rogue mounts.
Are you not fitting matching springs all round? I find it difficult to believe that fronts only will improve the handling.
The H&R front anti-roll bar made a big difference to mine - I used Bilstein B6s and H&R springs all round as well - perfect handling!
OEM fine for the front. The rears need to be upgraded to Rogue mounts.
Are you not fitting matching springs all round? I find it difficult to believe that fronts only will improve the handling.
The H&R front anti-roll bar made a big difference to mine - I used Bilstein B6s and H&R springs all round as well - perfect handling!
Re: Z3 front top mounts advice please
Hi mike thanks for the quick reply,sorry I should have said, I have already fitted the rear lowering springs and have only just got round to doing the fronts.
Re: Z3 front top mounts advice please
Anyone reccommend a good pair of front top mounts had a look on eBay and there's a lot to choose from.
Re: Z3 front top mounts advice please
Decent makes for things like bearings and bushes are:-
SKF
INA
Febi Bilstein
Lemforder/Boge
Meyle & Meyle HD
SKF
INA
Febi Bilstein
Lemforder/Boge
Meyle & Meyle HD