anyone ever replaced the stiff pipe that goes rusty? on the read brakes.
where did you buy it?
Rear Brake Pipe Replacement
- leahandsteve
- Joined: Sat 29 Sep, 2007 20:02
- Posts: 122
- Location: Stokenchurch (J5 M40)
Re: Rear Brake Pipe Replacement
If you can remove the old one and measure the length, then any decent motor factors can make you one up.
Re: Rear Brake Pipe Replacement
Have a look at this previous thread on the subject viewtopic.php?f=5&t=41844&p=388385&hili ... pe#p388385
Check on the oem parts site what pipes you have on your car as they differ if its a DSC equipped car, best check using last 7 digits of your chassis number.
Here is what comes back for my 1999 1.9 http://www.realoem.com/bmw/enUS/partgrp ... 3_19&mg=34
If you go the copper replacement route then they should see you and the car out.
Check on the oem parts site what pipes you have on your car as they differ if its a DSC equipped car, best check using last 7 digits of your chassis number.
Here is what comes back for my 1999 1.9 http://www.realoem.com/bmw/enUS/partgrp ... 3_19&mg=34
If you go the copper replacement route then they should see you and the car out.
Colb
1999 BMW 1.8 Z3
2003 BMW 2.5 Z4
1998 Honda Deauville NT650V
1999 BMW 1.8 Z3
2003 BMW 2.5 Z4
1998 Honda Deauville NT650V