Search found 486 matches
- Tue 17 Oct, 2023 21:46
- Forum: Boyz Toyz
- Topic: Cheap hands free connection via radio..
- Replies: 0
- Views: 2366
Cheap hands free connection via radio..
Thought I'd give a heads up to a little 'Streetwize FM Bluetooth Transmitter' unit I bought from Euro Car Parts for the princely sum of £9.99, for those who like me are running an older in car radio/CD player. Plugs into the lighter socket, easy connection to a free FM Channel, Bluetoothed to phone....
- Wed 23 Aug, 2023 09:26
- Forum: Z3 roadster
- Topic: Warning Lights appear and disappear on restart?
- Replies: 5
- Views: 16634
Re: Warning Lights appear and disappear on restart?
Thanks LaRy......
I've had ABS sensors, the YAW sensor and brake pedal sensor changed.
Will get the relay checked if it becomes a major issue
I've had ABS sensors, the YAW sensor and brake pedal sensor changed.
Will get the relay checked if it becomes a major issue
- Sun 20 Aug, 2023 21:31
- Forum: Z3 roadster
- Topic: Warning Lights appear and disappear on restart?
- Replies: 5
- Views: 16634
Warning Lights appear and disappear on restart?
I had a couple of sensors changed last year and all seemed ok, but now, having not driven Zeddie much recently, both the traction control and brake warning lights appear on start up.
Turning the engine off and re-starting makes them disappear.
Is this a code reset issue or something else?
Turning the engine off and re-starting makes them disappear.
Is this a code reset issue or something else?
- Sun 20 Aug, 2023 21:23
- Forum: Z3 roadster
- Topic: So So Sad
- Replies: 15
- Views: 18687
Re: So So Sad
The old saying ' a picture is worth a thousand words' is truer today than it ever was. A post saying that a particular Ceramic Polish is great has nothing against a decent photograph of a gleaming black Z3 before and after shot! The problem with forums that provide worthy information, as this one do...
- Sat 15 Apr, 2023 11:18
- Forum: Z3 roadster
- Topic: Very lumpy, tick over + dropped revs on starting...
- Replies: 6
- Views: 16961
Re: Very lumpy, tick over + dropped revs on starting...
UPDATE: Bought a cheap code reader, which showed issues with lean fuel mixture, cleared the fault and sailed through the MOT yesterday. In addition something that I'd not taken much notice of, the off centre position of the temperature gauge needle, is now resolved and points due north when engine w...
- Wed 12 Apr, 2023 22:17
- Forum: Z3 roadster
- Topic: Very lumpy, tick over + dropped revs on starting...
- Replies: 6
- Views: 16961
Re: Very lumpy, tick over + dropped revs on starting...
Thanks LaRay, will take a look later but meanwhile the new hose has sorted out the tick over, but left the ENGINE - emission values have deteriorated - warning light on the dash. I read from other threads that giving her a good run may clear the warning light but she's out of MOT, being sorted on Fr...
- Tue 11 Apr, 2023 23:19
- Forum: Z3 roadster
- Topic: Very lumpy, tick over + dropped revs on starting...
- Replies: 6
- Views: 16961
Re: Very lumpy, tick over + dropped revs on starting...
Thanks LaRy, The top hose on the air filter was split underneath the jubilee clip holding it on so I effected a temporary repair with some Duck tape but if anything it got worse so removed it completely to find the other end in tatters. How the cars been running with it in that condition I don't kno...
- Sun 09 Apr, 2023 11:27
- Forum: Z3 roadster
- Topic: Very lumpy, tick over + dropped revs on starting...
- Replies: 6
- Views: 16961
Very lumpy, tick over + dropped revs on starting...
My Z3 3.0i with 46k on the clock hasn't been driven much over the past 2 months but she's turned over on the key and been left to idle for 20 minutes on a regular basis. On starting yesterday she was very lumpy, warbling and struggling as if not all cylinders have kicked in. The rev counter jumps ba...
- Fri 31 Mar, 2023 23:31
- Forum: Z3 roadster
- Topic: Rear window beading.
- Replies: 7
- Views: 16927
Re: Rear window beading.
I believe there is a replacement rear window that has a flap of material to glue down and cover the beading for cases where, like on my Z3, the material has frayed and parted company. From what I recall it wasn't particularly pretty. I'll see if I can find a link, which I think was on YouTube and fi...
- Tue 10 Jan, 2023 00:24
- Forum: Z3 roadster
- Topic: FOR SALE: Stormforce Outdoor Cover for Z3
- Replies: 0
- Views: 2617
FOR SALE: Stormforce Outdoor Cover for Z3
I bought this a couple of years ago, put it on, took it off a couple of days later and put it back in the bag! It's a great cover but not a speedy job putting it on and taking it off hence the minimal use. In as new condition it comes in original storage bag with product labels still attached A new...
- Mon 12 Dec, 2022 00:10
- Forum: Stock exchange
- Topic: Z3 hardtop and fixing kit
- Replies: 2
- Views: 2050
Re: Z3 hardtop and fixing kit
I've been looking for a while now but cannot bring myself to pay £500 for a fitting kit
What colour and where in the country are you?
If I see any i'll post again...
What colour and where in the country are you?
If I see any i'll post again...
- Mon 22 Aug, 2022 11:23
- Forum: Z3 roadster
- Topic: Air Con, cleaned and re gassed stops working?
- Replies: 4
- Views: 2966
Re: Air Con, cleaned and re gassed stops working?
Thanks Robert. Will check the fuse box properly.....
UPDATE: Double checked fuses and all look good to me.
UPDATE: Double checked fuses and all look good to me.
- Sun 21 Aug, 2022 20:07
- Forum: Z3 roadster
- Topic: Air Con, cleaned and re gassed stops working?
- Replies: 4
- Views: 2966
Air Con, cleaned and re gassed stops working?
Having got used to running with no aircon for some while I treated myself to a special clean and re-gas a couple of months ago. All worked fine until the last couple of trips, nothing....no cold air at all?
Any ideas as to what the problem may be?
Any ideas as to what the problem may be?
- Tue 17 May, 2022 20:56
- Forum: Stock exchange
- Topic: MoT Fail
- Replies: 5
- Views: 3131
Re: MoT Fail
Private Message sent Parki
- Sun 01 May, 2022 22:38
- Forum: Z3 roadster
- Topic: Temperature gauge position?
- Replies: 2
- Views: 2759
Re: Temperature gauge position?
Thanks, i'll keep an eye on it...
- Wed 20 Apr, 2022 23:52
- Forum: Z3 roadster
- Topic: Temperature gauge position?
- Replies: 3
- Views: 2995
Re: Temperature gauge position?
Many thanks.
Performance seems fine and as i'm doing only a few hundred miles a year wondered if a good run would help matters...
Performance seems fine and as i'm doing only a few hundred miles a year wondered if a good run would help matters...
- Wed 20 Apr, 2022 23:52
- Forum: Z3 roadster
- Topic: Temperature gauge position?
- Replies: 3
- Views: 2995
Re: Temperature gauge position?
Many thanks.
Performance seems fine and as i'm doing only a few hundred miles a year wondered if a good run would help matters...
Performance seems fine and as i'm doing only a few hundred miles a year wondered if a good run would help matters...
- Thu 14 Apr, 2022 22:34
- Forum: Z3 roadster
- Topic: Temperature gauge position?
- Replies: 3
- Views: 2995
Temperature gauge position?
I was always led to believe that the temperature gauge needle should, on reaching full operating temperature, sit perfectly vertical at 12 o'clock.
Mine used to and does eventually get there but sits at 11.55 for what feels like 2 or 3 times longer than before.
Anything to worry about?
Mine used to and does eventually get there but sits at 11.55 for what feels like 2 or 3 times longer than before.
Anything to worry about?
- Thu 14 Apr, 2022 22:33
- Forum: Z3 roadster
- Topic: Temperature gauge position?
- Replies: 2
- Views: 2759
Temperature gauge position?
I was always led to believe that the temperature gauge needle should, on reaching full operating temperature, sit perfectly vertical at 12 o'clock.
Mine used to and does eventually get there but sits at 11.55 for what feels like 2 or 3 times longer than before.
Anything to worry about?
Mine used to and does eventually get there but sits at 11.55 for what feels like 2 or 3 times longer than before.
Anything to worry about?
- Tue 29 Mar, 2022 00:33
- Forum: Z3 roadster
- Topic: Rear Window extrusion problems New Zealand
- Replies: 11
- Views: 5693
Re: Rear Window extrusion problems New Zealand
Thanks for sharing. My concern was that in the absence of the beading, the canvas could fray at the ends, making for a full hood replacement at some point. Have you noticed any fraying of the canvas at the edges, or is it holding up despite no beading? I haven't done anything yet. Like you I'm stil...
- Sat 26 Mar, 2022 00:40
- Forum: Z3 roadster
- Topic: Rear Window extrusion problems New Zealand
- Replies: 11
- Views: 5693
Re: Rear Window extrusion problems New Zealand
Here's a video of the glue down window kit. About an inch out from the rubber bead is the line of stitching around the window that holds the zip to the roof. He can be seen stitching the zip back where it's broken away.
https://youtu.be/pTCr_PvTQyQ
https://youtu.be/pTCr_PvTQyQ
- Sat 26 Mar, 2022 00:15
- Forum: Z3 roadster
- Topic: Rear Window extrusion problems New Zealand
- Replies: 11
- Views: 5693
Re: Rear Window extrusion problems New Zealand
Just a couple of days ago I spoke to Dee at Soft Tops in Croydon and he gave me a full explanation of the issues and potential fixes for the Z3 rear window. On my roof the canvas that should tuck under the plastic bead has shrunk slightly and has pulled away in the corners. An OEM or like for like r...
- Sun 20 Mar, 2022 23:40
- Forum: Z3 roadster
- Topic: Windscreen washers variable output?
- Replies: 15
- Views: 6298
Re: Windscreen washers variable output?
All sorted, well nearly.......but for the benefit of others who may have the same issues. The problem was just dirt and algae in the tank. The pumps were fine. The pumps pulled straight out of the tank with a little extra force. I temporarily sealed the holes where they came out using a couple of bo...
- Thu 17 Mar, 2022 23:15
- Forum: Z3 roadster
- Topic: Windscreen washers variable output?
- Replies: 15
- Views: 6298
Re: Windscreen washers variable output?
Will do, thanks again...Mike Fishwick wrote: ↑Tue 15 Mar, 2022 09:24 Try heating the pipes with a hair dryer - once they become soft they should pull off easily.
- Sat 12 Mar, 2022 00:58
- Forum: Z3 roadster
- Topic: Windscreen washers variable output?
- Replies: 15
- Views: 6298
Re: Windscreen washers variable output?
Take the nozzles off and leave them overnight in a solution of hot water and a dishwasher tablet. While this is going on, make sure that the pipes do not have non-return valves or filters fitted, and also check that the pump is delivering plenty of water when the pipes are partially covered with a ...
- Mon 07 Mar, 2022 22:40
- Forum: Z3 roadster
- Topic: Windscreen washers variable output?
- Replies: 15
- Views: 6298
Re: Windscreen washers variable output?
Bumping this as still struggling! .. and that's where i'm stuck. I've managed to free it from the bulkhead but cannot for the life of me unclip the pipes and electrics (Pump?) from either side. I read elsewhere online that on older models with a single bolt fixing - mine has 2 - the pump can be pull...
- Mon 07 Mar, 2022 22:40
- Forum: Z3 roadster
- Topic: Windscreen washers variable output?
- Replies: 15
- Views: 6298
Re: Windscreen washers variable output?
Bumping this as still struggling! .. and that's where i'm stuck. I've managed to free it from the bulkhead but cannot for the life of me unclip the pipes and electrics (Pump?) from either side. I read elsewhere online that on older models with a single bolt fixing - mine has 2 - the pump can be pull...
- Tue 25 Jan, 2022 22:28
- Forum: Z3 roadster
- Topic: Any Z3 expertise near me?
- Replies: 2
- Views: 2313
Re: Any Z3 expertise near me?
There's a BMW Specialist who I've not used myself, but apparently is highly regarded, in the Chelmsford CM2 area.
https://www.dukesparkautomotive.co.uk/
I'll be giving them a look in the coming weeks so will give some feedback accordingly.
https://www.dukesparkautomotive.co.uk/
I'll be giving them a look in the coming weeks so will give some feedback accordingly.
- Tue 18 Jan, 2022 22:07
- Forum: Z3 roadster
- Topic: Windscreen washers variable output?
- Replies: 15
- Views: 6298
Re: Windscreen washers variable output?
Helping hand needed. Finally got round to having a proper look at the washer situation and here's where I am. Water is still making it's way to the nozzles so the pump is working - and can be heard. I've disconnected the pipe that runs along the wing and underneath the bonnet and the flow from the p...
- Tue 04 Jan, 2022 14:34
- Forum: Z3 roadster
- Topic: Headlight lenses
- Replies: 3
- Views: 3318
Re: Headlight lenses
Has anybody tried Duxback headlight cleaner from Eurocarparts?
No sanding required, seems too good to be true?
https://youtu.be/cdlO7Ii30nU
No sanding required, seems too good to be true?
https://youtu.be/cdlO7Ii30nU
- Fri 08 Oct, 2021 22:13
- Forum: The Gallery
- Topic: Robert T Pics
- Replies: 40
- Views: 15843
Re: Robert T Pics
Nice one, I can't seem to drive anywhere without traffic and pot holes at the moment
- Thu 12 Aug, 2021 00:23
- Forum: Z3 roadster
- Topic: Which Wiper Blades?
- Replies: 8
- Views: 2855
Re: Which Wiper Blades?
On Bosch's own parts finder they say AR20 U's: https://www.boschwiperblades.com/offers Eurocarparts are always putting out discount codes but you have to search for them sometimes. AR20U's at £16.49 can be brought down by 40% to £9.73 with the right code. I downloaded a free code finder called POUCH...
- Tue 10 Aug, 2021 15:06
- Forum: Z3 roadster
- Topic: Which Wiper Blades?
- Replies: 8
- Views: 2855
Re: Which Wiper Blades?
Many thanks Pete..
Sounds the same as mine. They clear the screen extremely well and may even adapt themselves after a bit of sun and use so will hang in there.
Sounds the same as mine. They clear the screen extremely well and may even adapt themselves after a bit of sun and use so will hang in there.
- Mon 02 Aug, 2021 01:03
- Forum: Z3 roadster
- Topic: Windscreen washers variable output?
- Replies: 15
- Views: 6298
Windscreen washers variable output?
The drivers side screen washer on my Z3 appear is only pushing the water in two jets that barely make it to the bottom of the screen. (Jets are at the correct angle to reach screen) On the passenger side one jet works as it should and hits the screen half way up, the other is blocked and cannot be c...
- Mon 02 Aug, 2021 00:34
- Forum: Z3 roadster
- Topic: Which Wiper Blades?
- Replies: 8
- Views: 2855
Re: Which Wiper Blades?
I've just fitted a pair of Bosch AR20 U Aerotwins as recommended when entering car Reg number into the Bosch part finder. The drivers side one is fine and clears the windscreen well along the whole length. The passenger side however, does not touch the screen for about 4-5cms towards the outer edge?...
- Mon 28 Jun, 2021 13:56
- Forum: Z3 roadster
- Topic: Which Wiper Blades?
- Replies: 8
- Views: 2855
Re: Which Wiper Blades?
Thanks. I'm hoping they won't collect quite as many leaves as wellpetecossie wrote: ↑Sat 26 Jun, 2021 20:48 I've had Bosch Aero wiper blades (front & rear screens) on my Z3 MC since 2013, I found them to be a bit more efficient than the OEM type of wiper blades. Also in my opinion they look better aswell.
- Fri 25 Jun, 2021 20:50
- Forum: Z3 roadster
- Topic: Which Wiper Blades?
- Replies: 8
- Views: 2855
Which Wiper Blades?
Does anybody have any reason for or against changing the traditional framed wiper blades on a Z3 for the single blade frameless Bosch Aero's or similar?
- Mon 24 May, 2021 21:51
- Forum: Z3 roadster
- Topic: Prices on the up
- Replies: 9
- Views: 5453
Re: Prices on the up
Higher prices seem to be very much attached to lower mileage. In some cases on cars that don't quite have the kerb appeal (wheels etc.,)
- Wed 12 May, 2021 10:08
- Forum: Z3 roadster
- Topic: New convertible roof questions?
- Replies: 15
- Views: 4857
Re: New convertible roof questions?
Visited Dee at Soft Tops Croydon last week for a new black hood at £575 fitted. Really pleased with it - the hoods are hand made by Dee and are terrific quality. Having a new window makes all the difference too! l: Here's some pictures: https://live.staticflickr.com/65535/51157424622_1b25c34c5d_c.j...
- Mon 12 Apr, 2021 21:33
- Forum: Z1 roadster
- Topic: new Battery?
- Replies: 2
- Views: 2330
Re: new Battery?
Sorry don't know what sort you need but Eurocarparts have offers on when you get through to the Checkout.
A Bosch S4 for my Z3 listed at £164.99 cost me just over £100 the other week. Now down to £97.34 with code POUCHBT41 Or Mid60
A Bosch S4 for my Z3 listed at £164.99 cost me just over £100 the other week. Now down to £97.34 with code POUCHBT41 Or Mid60
- Fri 09 Apr, 2021 21:52
- Forum: Z3 roadster
- Topic: New convertible roof questions?
- Replies: 15
- Views: 4857
Re: New convertible roof questions?
Thanks for your feedback...
Will report back when sorted. Probably going with Soft Tops Croydon based on multiple reviews on all cars including Zeds...
Will report back when sorted. Probably going with Soft Tops Croydon based on multiple reviews on all cars including Zeds...
- Thu 08 Apr, 2021 12:30
- Forum: Z3 roadster
- Topic: New convertible roof questions?
- Replies: 15
- Views: 4857
New convertible roof questions?
Finally getting round to replacing the roof on my Z3 and have narrowed down the search to one made by Monsoon that uses Hartz fabric as used by BMW. Mine is a 2002 model with the air vents in the rear sides but Monsoon now only do the one without vents that I believe was fitted onto earlier models? ...
- Fri 19 Feb, 2021 22:26
- Forum: Z3 roadster
- Topic: Battery dead and won't charge?
- Replies: 4
- Views: 2311
Re: Battery dead and won't charge?
Thankyou all........i'll follow all suggestions.
I was hoping to get another few months out of the battery in the hope that Lockdown restrictions will be eased.
I was hoping to get another few months out of the battery in the hope that Lockdown restrictions will be eased.
- Fri 19 Feb, 2021 00:30
- Forum: Z3 roadster
- Topic: Battery dead and won't charge?
- Replies: 4
- Views: 2311
Battery dead and won't charge?
Z3 3.0i automatic I left the car a little too long so not enough charge in the battery - 6 years old, a Bosch S3 - to start her. Fixed up the charger (which i've checked is working ok) left overnight and it's now completely drained. Not a whisper. Jump leads do nothing either. Dead as a Dodo. Any su...
- Wed 17 Feb, 2021 18:35
- Forum: The Lounge
- Topic: Unseen Video Silverstone 2012 The Z1's
- Replies: 1
- Views: 5347
Unseen Video Silverstone 2012 The Z1's
Just found this in my PC Downloads folder so uploaded to YouTube.....
https://www.youtube.com/watch?v=W1Rjwh3Uaek
...a little longer
https://www.youtube.com/watch?v=wn5tElWgCwc
The rest: https://www.youtube.com/watch?v=RWf8_o0At_s
https://www.youtube.com/watch?v=W1Rjwh3Uaek
...a little longer
https://www.youtube.com/watch?v=wn5tElWgCwc
The rest: https://www.youtube.com/watch?v=RWf8_o0At_s
- Sun 31 Jan, 2021 00:52
- Forum: Let's talk
- Topic: Gazza - sad news
- Replies: 21
- Views: 10029
Re: Gazza - sad news
Terribly sad news.
I only knew Gary as a moderator of, and contributor to, this forum but his willingness to help myself and countless others with advice wherever possible was always very much appreciated.
Condolences to family and friends.
RIP Gary
I only knew Gary as a moderator of, and contributor to, this forum but his willingness to help myself and countless others with advice wherever possible was always very much appreciated.
Condolences to family and friends.
RIP Gary
- Fri 22 Jan, 2021 12:35
- Forum: Z3 roadster
- Topic: Condensation
- Replies: 12
- Views: 7735
Re: Condensation
These arrived and they've completely solved my condensation problem. They are huge compared to Pingi's. https://www.ebay.co.uk/itm/124061407611 I did put our office dehumidifier in the passenger side footwell first and run it for a couple of days until the windows were clear. Surprisingly, very litt...
- Fri 01 Jan, 2021 22:59
- Forum: Z3 roadster
- Topic: Condensation
- Replies: 12
- Views: 7735
Re: Condensation
Update: I tried the dehumidifier from my business unit that just about fitted in the passenger side footwell. Ran it for 24 hours and every drop of condensation disappeared but there was barely a mug of water in the container. I've put the Pingi bags back in and so far no obvious signs of condensati...
- Wed 30 Dec, 2020 11:47
- Forum: Z3 roadster
- Topic: Condensation
- Replies: 12
- Views: 7735
Re: Condensation
Revitalising this old post to see if anyone does use an electric dehumidifier and how they are getting on with it?
My earlier reply that the Pingi bags worked for me is somewhat dated and they don't keep up with the condensation issue all the time.
My earlier reply that the Pingi bags worked for me is somewhat dated and they don't keep up with the condensation issue all the time.
- Tue 29 Dec, 2020 15:13
- Forum: Z3 roadster
- Topic: Engine outline warning lamp?
- Replies: 14
- Views: 6691
Re: Engine outline warning lamp?
For info, this is the hose that had the split in it - on the stubby bit on the side.
https://www.ebay.co.uk/itm/BMW-GENUINE- ... SwUYNaBEwC
https://www.ebay.co.uk/itm/BMW-GENUINE- ... SwUYNaBEwC