Under Bonnet Windscreen Washer Tubing Layout

UK forum for general and technical discussion about the Z3 roadster

Moderator: Gazza

Post Reply
klm_Z3
Joined: Mon 10 Nov, 2014 08:21
Posts: 3

  Z3 roadster 1.9

Under Bonnet Windscreen Washer Tubing Layout

Post by klm_Z3 »

The different parts for the windscreen washer system is shown at the following link:

https://www.realoem.com/bmw/enUS/showpa ... Id=61_0171

On my 1997 Z3, the tubing layout has been modified and I would appreciate if someone could provide advice or post a picture of the under bonnet layout showing how the tubes are routed to the two nozzles.

User avatar
Ian_C
Joined: Sun 10 Dec, 2006 20:10
Posts: 2414

  Z3 roadster 2.8
Location: Lytham St Annes

Re: Under Bonnet Windscreen Washer Tubing Layout

Post by Ian_C »

This is how it looks on my 1998 ///m coupe

Image
Current...1998 ///M Coupe
Image
Previously...1997 Z3 2.8
Image

klm_Z3
Joined: Mon 10 Nov, 2014 08:21
Posts: 3

  Z3 roadster 1.9

Re: Under Bonnet Windscreen Washer Tubing Layout

Post by klm_Z3 »

Many thanks Ian for posting a picture of the under bonnet view of your car and apologies for the delay in my response. I tried to post few pictures of the tubing layout on my car but it says they are too heavy to post. I note that tubing at the central part is secured with tape. Looking at the parts list I found item 6, Cable Strap Brackets 61131379084 are missing on my car. Could you please let me know where these brackets go? Should these be fitted in place of tape?

Post Reply