MFSW Retrofit - Cruise Control Help

UK forum for general and technical discussion about the Z3 roadster
Post Reply
Jay-Dee-ZA
Joined: Fri 26 Mar, 2021 12:03
Posts: 2

  Z3 roadster 2.8

MFSW Retrofit - Cruise Control Help

Post by Jay-Dee-ZA »

I know this has been discussed back and forth over the years but I am unable to find any full success stories or answers and am hoping that someone knows or can help

I am about to embark on fitting a Multifunction Steering Wheel to my 1998 Z8 (pre-facelift, single stage airbag & pre-drive by wire throttle). The wheel has come off a E39 also with single stage airbag and is including the slip-ring.

The radio is not going to be an issue (hopefully), as I know this connects directly to pin 7 on the back of my CD43 unit. I know I need to power the buttons for back lighting but what I don't know is the cruise control side of things.


My car does not currently have cruise control, so I will need to retrofit it. This is a simply enough task and parts are almost all available easily off eBay... The question comes in, is the Z3 module compatible with the steering wheel? I know on the E36 side, some of the guys have removed the steering column stalk and only used the buttons but once again, I am not sure of module there. On the E39, it supports both stalk and wheel but I am almost sure this is a different module and I don't know if either of them (E39 or E36) support the Z3 manual throttle cable cruise control

Anyone able to offer some advice?
Fender2004
Joined: Fri 14 Aug, 2009 10:24
Posts: 907

  Z3 roadster 2.8
Location: Houghton-Le-Spring

Re: MFSW Retrofit - Cruise Control Help

Post by Fender2004 »

If you go to realoem.com and put the part numbers in, it will tell you what cars the parts were used on.
Image
bertiejaffa
Joined: Fri 26 Jul, 2013 09:28
Posts: 1732

  M roadster S50
Location: Manchester

Re: MFSW Retrofit - Cruise Control Help

Post by bertiejaffa »

I will be honest I have never seen a retro cruise on the Z3 that is controlled from the steering wheel.

Maybe thats because the standard retro cruise control parts work (assuming the parts work) and the jump to then modify it further to use a different "smart" wheel might just be a step to far for people to try.
Here come the girls.....
Image
My //M Refurb
My First Zed Journal
Post Reply