Hi all, Can anyone furnish me with torque tightening settings for the following items on the front suspension on a 2002 Z3 1.9 M43 engined model fitted with Mtech sports suspension:
Hub nuts, Brake caliper carrier bolts, brake caliper slide pins, suspension strut bottom and top mounts and the balljoint inner and outer nuts. Thanks.
Regards BB
Torque Settings
Re: Torque Settings
http://www.torkspec.com/torkspecmm.aspx?KI=46
Listing at above link for Z3 might have what your looking for.
Colb
Listing at above link for Z3 might have what your looking for.
Colb
Colb
1999 BMW 1.8 Z3
2003 BMW 2.5 Z4
1998 Honda Deauville NT650V
1999 BMW 1.8 Z3
2003 BMW 2.5 Z4
1998 Honda Deauville NT650V
Re: Torque Settings
This should cover all your needs.
Torques found in the Bentley BMW Z3 service manual.
Brake caliper to strut housing = 110Nm
road wheel to hub = 120Nm
Stabiliser bar link to strut = 59 Nm
Steering arm to strut housing = 107 Nm
Strut assembly to strut tower = 22 Nm
control arm ball joint to sub frame = 85 Nm
control arm bushing carrier to body = 47 Nm
control arm ball joint to steering arm = 62 Nm
steering arm to strut housing = 59 Nm
stabiliser bar link to control arm = 59 Nm
Torques found in the Bentley BMW Z3 service manual.
Brake caliper to strut housing = 110Nm
road wheel to hub = 120Nm
Stabiliser bar link to strut = 59 Nm
Steering arm to strut housing = 107 Nm
Strut assembly to strut tower = 22 Nm
control arm ball joint to sub frame = 85 Nm
control arm bushing carrier to body = 47 Nm
control arm ball joint to steering arm = 62 Nm
steering arm to strut housing = 59 Nm
stabiliser bar link to control arm = 59 Nm
-
- Joined: Mon 28 Oct, 2013 19:35
- Posts: 261
Re: Torque Settings
Brill, thanks for that chaps, just what I needed to know. The Forum comes up trumps again!!
Regards BB
Regards BB